how to answer questions on case study

Key Study Skills

• Assignment Calculator
• Managing nervousness
• Allocating time and using the marking system
• Using the reading time effectively
• Answering multi-choice and short answer questions
• Answering essay and case study questions in exams
• Managing exam stress
• Academic Skills for Success

Answering essay questions in exams

Writing an essay in an exam is similar in many ways to writing an essay for an assignment: It needs to be clearly structured, and your ideas need to be linked and supported by evidence.

Essay questions in exams

• Read the question through carefully to make sure you are answering what has been asked.  Missing one part of a question can cost you a lot of marks.
• Make a quick plan of the points you want to include in your answer.
• Use essay structure: introduction, points, conclusion.  But if you run out of time, it can be a good idea to write notes.
• Get right to the point from the beginning.  Use the words from the question to write your first sentence. For example:

Question: What do you think is the most important intercultural communication issue in New Zealand? First sentence: At present in New Zealand the most important intercultural communication issue is...

• Remember to include one idea per paragraph, and to begin each paragraph with a clear topic sentence.
• Make sure your writing is legible.
• Grammar, punctuation and spelling are not as important as in an assignment but should still be of a good standard.

Answering case study questions

Exam questions that ask you to anlayse case studies (also called scenarios) are usually designed to test your ability to relate theories and concepts to real-world situations.

Preparing for case studies before the exam:

• Start by identifying the theories and concepts covered in your course.  Organise and review the information you have on these theories/concepts so you understand them.
• Practice reading case studies and identifying relevant information. It's probably useful to practice doing this with a time limit as you will have one in your exam.
• Practice relating concepts and theories to real-world situations: ask lecturers and check textbooks for practice examples. It is also worth checking past exams for your course to see if there are examples of case study questions.

During the exam

• Take time to plan: Have a clear idea of how much time you have to answer the question. Then plan to spend some time reading the exam question, the case study and planning your answer. Take time to make sure you have understood the case study and know what the exam question is asking you to do:
• Read the exam question(s)
• Then skim read the case study to get the general idea. Highlight or underline key points
• Reread the question to make sure you understand it and to focus your attention when you reread the case study.
• Reread the case study carefully. Make a note of any ideas that you think of.
• Answer the question linking relevant theories and concepts to specific information from the case study. Usually you will need to write your answers in clearly formed paragraphs which have a clear topic that is well-supported with evidence and examples.
• Instead of simply describing or restating information from the case itself, use specific details or examples to support the points you are trying to make. This is where you link theory to the facts from the case study.
• << Previous: Answering multi-choice and short answer questions
• Next: Managing exam stress >>

Unitec Private Bag 92025 Victoria Street West Auckland 1142 Unitec website

• Last Updated: Sep 4, 2024 11:22 AM
• URL: https://guides.unitec.ac.nz/studyskills

• Harvard Case Study Solution
• Case Study Report Writing Service
• Case Study Presentation Help
• Finance Case Study Help
• Accounting Case Study Help
• Marketing Case Study Help
• Nursing Case Study Help
• Management Case Study Help
• Economics Case Study Help
• MBA Case Study Help
• Assignment Help
• Accounting Assignment Help
• Finance Assignment Help
• Marketing Assignment Help
• HR Assignment Help
• Economics Assignment Help
• Law Assignment Help
• Project Management Assignment Help
• Nursing Assignment Help
• Biology Assignment Help
• Chemistry Assignment Help
• English Assignment Help
• Homework Help
• Thesis Help
• Dissertation Help
• How it Works

How To Answer A Case Study

We totally understand the dire need of students to find credible help with their case studies. Whether they are the students of a college or a university, time and again, you will be asked to make your case studies effectively. This brings to the question as to who will answer a case study impressively? Students can find several online companies that guarantee some great tips for answering your case studies nicely, but not all of them are to rely on.

We bet we have the best step to step guide with us that can easily get you to the end of your case study solutions . The following tips will promise to help you efficiently with your case, irrespective of how difficult they are. Precisely, when it comes to the question of how to answer a case study, it’s all about words. So, do not hesitate in using the correct and researched words to leave a lasting impact.

How To Answer A Consulting Case Study On Three Major Types

Case studies are not an easy task to fulfill in your academic life. If students dare to take it lightly, chances are you will not be able to impress your teachers. However, case studies do not come as easy as they sound. There are three significant types of case studies that are popular among students.

• Legal Case Study
• Nursing Case Study
• Management Case Study

These are the common subjects that will lead to stress in your college or university life. With so much other stuff to do, students don’t feel happy about the pressure of finding a fruitful answer to the case study. There is no doubt it’s quite a challenging situation for any student who has to make a flawless case study. That’s why we usually advise our students to get online help for their case study writing. Because of it, they can have fewer chances of flunking in these exams.

The Helpful 15 Tips On How To Answer A Case Study

When students have no option but to write a persuasive case study, it is preferable to set out on a journey to get external help for it. You can get easy help online. You will be pleased to know that our writing help has some best case study assignment writers who can distress you in a matter of a few hours. But, the most vital thing to know is that a student should know the basic formulas to find good answers to your case studies on their own.

We have collected some fabulous notable tips for our students can help them for years with their case studies:

• Use Conventional Tone: The foremost thing while writing case studies is to use a professional tone to have a lasting impact on your papers.
• Use Your Words Only: It is equally important for a student to use simple and their wording while writing case studies.
• Don’t Be Too Precise: Sometimes, providing proper sentences gives an understandable image to your case studies. Hence, soon use shorter or confusing sentences.
• Use Examples: The students should support their case studies with relevant examples. The examples can be given through a video, statements which should prove your opinions as well.
• Accurate Grammar: Your writing is the crucial thing, Don’t engage in poorly written content. Use proper English without any grammatical errors or spelling mistakes.
• No Acronyms: Students should avoid using acronyms while writing their case studies.
• Use Life Experiences: Your practical life experiences are important to make a compelling case study. Try to use live examples to give a more impactful expression to your case studies.
• Justified Statements Are Necessary: The best way to answer a case study is to agree or disagree with the justified statements.
• Make Complete Sentences: It is also an important point to make a flawless case study paper. While writing, try to make complete sentences.
• No Spelling Flaws: Bad grammar or wrong spellings are not tolerable. Hence, students should do keen writing with no spelling mistakes.
• Proper Answers: Try to give proper answers to the questions.
• Adequate Justifications: Justifications are crucial. Make adequate justifications to avoid any confusion.
• Sufficient Reasoning: The reasoning should be enough while writing a case study.
• No indefinite Answers: Indefinite answers cause a hell of a lot of confusion and complexity in a case study. That’s why the students should avoid making indefinite answers.
• Provide Proper Conversations: It is also vital to contribute as much as possible in conversations.

Related: How To Buy A Case Study

How To Properly Answer A Case Study

Precisely, a good case study is a scenario that students will analyze out of a professional concept. However, it is blended with useful questions that demand definite answers. There can be a sample case study assignment online that can always help a student while writing one but, it is equally important to know the proper way of answering a case study.

• Reading a case study is the foremost important thing. Later analyze the question carefully too.
• It is mandatory to identify the issue of the case study thoroughly
• A bridge is vital to link the theory to practice
• Planning of the answers comes next.
• Start making your case study answers
• Proofread and edit it carefully to avoid mistakes
• Submit the case studies to your tutors.

How To Answer A Case Study Interview

This aspect is a bit tricky. In a case study interview, you will be given a case and will be asked to analyze the situation with possible solutions.

Here are some common and most useful tips about answering the interview questions:

• Listening carefully to the questions is the key
• Asl the proper questions
• Highlight your approach
• do brainstorming
• Don’t lose focus
• Be attentive to feedback
• Prove your quantitative skills
• Summarize in detail

To write a productive case study is hard, but if you choose online help for it, this task becomes really easy. Be a smarter version of yourself and find great ways of handling the answers to your case study problems. We have a proficient team that can make this hectic task to answer your case study a piece of cake. Don’t be late to avail of our quality help.

Suggested Articles

Importance OF Case Study

How To Write A Case Study For Assignment

How To Write Case Study In MBA

How To Solve A Case Study

Hacking the Case Interview

Looking for a case interview cheat sheet or study guide to help you prepare for your upcoming consulting interviews?

Download our Case Interview Cheat Sheet and Study Guide , which covers all of the most important things you need to know. If you are looking to read the case interview cheat sheet in plain text, we’ve included all of the text below.

This case interview cheat sheet covers:  

What is a case interview?

What do case interviews assess?

What is the structure of a case interview?

What are the common types of cases?

What formulas do you need to know for case interviews?

What numbers do you need to know for case interviews?

What are some case interview tips?

If you’re looking for a step-by-step shortcut to learn case interviews quickly, enroll in our case interview course . These insider strategies from a former Bain interviewer helped 30,000+ land consulting offers while saving hundreds of hours of prep time.

A case interview is a 30- to 45-minute exercise that places you in a hypothetical business situation in which you and the interviewer work together to develop a recommendation or answer to a business problem.

• How can Walmart increase its profitability?
• How can Nike increase customer retention?
• How should Apple price its new smartphone?

A case interview assesses five criteria:

1.   Logical, structured thinking : Can you structure complex problems and ideas in a clear and organized way?

2.  Analytical problem solving: Can you analyze and interpret data to draw the right conclusions?

3.  Business acumen : Do you have a strong understanding of business fundamentals and good business judgment?

4.  Communication skills : Can you communicate clearly, concisely, and articulately?

5.  Personality and cultural fit : Are you a good fit for the work culture of the firm you are interviewing with?

All case interviews follow seven major steps:

1.  Understand the case background : Take notes while the interviewer reads you the case information. Pay particularly close attention to the context, company, and objective.

2.  Ask  clarifying questions : If necessary, ask 1 – 3 questions to clarify the objective of the case, understand the company better, or understand an unfamiliar term.

3.  Structure a framework : Structure a framework to break down the complex business problem into simpler, smaller components. A framework is a tool that organizes different ideas into major categories. Present your framework to the interviewer. Make sure that your framework is MECE .

M utually E xclusive: None of the parts of your framework overlap with each other

C ollectively E xhaustive: All of the parts of the framework account for everything you need to know to solve the case with no major areas missing.

4.  Start the case : How the case will start depends on whether the case is an interviewer-led case or a candidate-led case .

Interviewer-led case : The interviewer will be steering and controlling the direction of the case. They will explicitly point you to which questions to answer.

Candidate-led case : You will be driving the direction of the case. You will propose what area of your framework to start in, what questions you want to answer, what analyses you want to do, and what the next step of the case is.

5.  Solve quantitative problems : There are three major types of quantitative problems you could be asked in case interviews.

Market sizing or estimation questions : You will be asked to calculate the size of a particular market or estimate a particular figure. You may need to make your own assumptions on what number to use or the interviewer may provide you with the data.

Profitability or breakeven questions : You will be asked to calculate the expected profitability of a company or investment decision. You could also be asked to calculate the conditions necessary for a company to break even .

Charts and graphs questions : You will be asked to interpret data from various charts or graphs . These can include bar charts, pie charts, line graphs, scatterplots, bubble charts, and waterfall charts.

6.  Answer qualitative questions : There are two major types of qualitative questions you could be asked in case interviews.

Brainstorming questions : You will be asked to brainstorm a list of ideas for a particular problem or question.

Business judgment questions : You will be asked for your opinion on a business issue or a strategic decision.

7. Deliver a recommendation : Present your recommendation and provide the major reasons that support it. Then, propose potential next steps that you would take if you had more time.

Profitability case : A company is experiencing a decline in profits or profitability and is trying to identify what is causing the decline and what they should do about it.

How to solve:  

• Identify the driver behind the decline in profitability, whether it is from a decline in revenue, increase in costs, or both
• Understand what is causing this by looking at customer needs, competitor moves, and market trends
• Identify ways to improve profitability

Growth strategy case : A company is trying to decide how to best grow its business.

• Determine whether the company is looking to grow organically or inorganically
• For organic growth, consider growth through existing revenue sources and new revenue sources
• For inorganic growth, consider potential acquisitions and partnerships

Market entry case : A company is trying to decide whether they should enter a particular new market.

• Determine whether the market is attractive
• Assess the competitive landscape
• Determine if the company has the capabilities to enter
• Estimate the expected profitability from entering

Merger & acquisition case : A company is trying to decide whether or not they should acquire or merge with a particular company.

• Determine whether the company is attractive
• Assess potential synergies and risks
• Estimate the financial implications

New product case : A company is trying to decide whether or not they should develop and launch a particular new product.

How to solve:

• Determine whether the market that the product targets is attractive
• Assess whether the product meets customer needs and is superior to competitor products
• Determine whether the company has the capabilities to successfully develop and launch the product
• Estimate the expected profitability from launching the product

Pricing case : A company is trying to decide the best way to price a particular product or service.

• Determine the cost to produce the product. This is your minimum price.
• Estimate the customer’s maximum willingness to pay by quantifying the value the product provides. This is your maximum price.
• Investigate the price that competitors are setting for similar products. This will help you determine the optimal price between your minimum and maximum price.

Profit Formulas

• Profit = Revenue – Costs
• Revenue = Quantity * Price
• Costs = Total Variable Costs + Total Fixed Costs
• Total Variable Costs = Quantity * Variable Costs
• Profit = (Price – Variable Costs) * Quantity – Total Fixed Costs

Investment Formulas

• Return on Investment = Profit / Investment Cost
• Payback Period = Investment Cost / Profit per Year

Operations Formulas

• Output = Rate * Time
• Utilization = Output / Maximum Output

Market Share Formulas

• Market Share = Company Revenue in the Market / Total Market Revenue
• Relative Market Share = Company Market Share / Largest Competitor’s Market Share

General Statistics

• Global population: 8 billion
• Average household size: 2.5 people per household
• Average life expectancy: 80 years

Country Population Statistics  

• United States: 320 million
• Canada: 40 million
• Mexico: 125 million
• Brazil: 200 million
• United Kingdom: 60 million
• Germany: 80 million
• France: 60 million
• China: 1.4 billion
• India: 1.4 billion
• Russia: 150 million
• Japan: 125 million
• Australia: 25 million

Tip #1 - Make sure you understand the business problem and objective : Answering or addressing the wrong business problem is the quickest way to fail a case interview.

Tip #2 - Don’t rely on using memorized frameworks : Interviewers can tell when you are regurgitating memorized information and not thinking critically.

Tip #3 - Structure your approach before doing any math calculations : This helps you avoid making unnecessary calculations or reaching a dead-end.

Tip #4 - Talk through your calculations out loud : This decreases the likelihood of making a mistake and helps the interviewer follow what you are doing

Tip #5 - Structure your answer to qualitative questions : Use a simple two-part framework such as internal/external, short-term/long-term, or economic/non-economic.

Tip #6 - Answer “so what?” after every question : Throughout the case, connect each of your answers back to the case objective. What implications does your answer have on the overall business problem?

Tip #7 - Have a firm recommendation : Do not have a flimsy recommendation that switches back and forth between two different recommendations. Pick one and provide support.

Tip #8 - Be 80/20 : You will not have time to answer every single question. Focus on the most important questions that have the greatest impact on your answer. This is the 80/20 principle which states that 80% of the outcome comes from 20% of your effort.

Tip #9 - Be coachable and easy to work with : Interviewers look for people that they would personally want to have on their team. Demonstrate that you would be a great teammate.

Tip #10 - Be enthusiastic : Interviewers want to hire candidates that love their job and will work hard. Displaying enthusiasm shows you are passionate about consulting and working at the firm.

Check out our complete list of case interview tips .

Land Your Dream Consulting Job

Here are the resources we recommend to land your dream consulting job:

For help landing consulting interviews

• Resume Review & Editing : Transform your resume into one that will get you multiple consulting interviews

For help passing case interviews

• Comprehensive Case Interview Course (our #1 recommendation): The only resource you need. Whether you have no business background, rusty math skills, or are short on time, this step-by-step course will transform you into a top 1% caser that lands multiple consulting offers.
• Case Interview Coaching : Personalized, one-on-one coaching with a former Bain interviewer.
• Hacking the Case Interview Book   (available on Amazon): Perfect for beginners that are short on time. Transform yourself from a stressed-out case interview newbie to a confident intermediate in under a week. Some readers finish this book in a day and can already tackle tough cases.
• The Ultimate Case Interview Workbook (available on Amazon): Perfect for intermediates struggling with frameworks, case math, or generating business insights. No need to find a case partner – these drills, practice problems, and full-length cases can all be done by yourself.

For help passing consulting behavioral & fit interviews

• Behavioral & Fit Interview Course : Be prepared for 98% of behavioral and fit questions in just a few hours. We'll teach you exactly how to draft answers that will impress your interviewer.

Land Multiple Consulting Offers

Complete, step-by-step case interview course. 30,000+ happy customers.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• What Is a Case Study? | Definition, Examples & Methods

What Is a Case Study? | Definition, Examples & Methods

Published on May 8, 2019 by Shona McCombes . Revised on November 20, 2023.

A case study is a detailed study of a specific subject, such as a person, group, place, event, organization, or phenomenon. Case studies are commonly used in social, educational, clinical, and business research.

A case study research design usually involves qualitative methods , but quantitative methods are sometimes also used. Case studies are good for describing , comparing, evaluating and understanding different aspects of a research problem .

Table of contents

When to do a case study, step 1: select a case, step 2: build a theoretical framework, step 3: collect your data, step 4: describe and analyze the case, other interesting articles.

A case study is an appropriate research design when you want to gain concrete, contextual, in-depth knowledge about a specific real-world subject. It allows you to explore the key characteristics, meanings, and implications of the case.

Case studies are often a good choice in a thesis or dissertation . They keep your project focused and manageable when you don’t have the time or resources to do large-scale research.

You might use just one complex case study where you explore a single subject in depth, or conduct multiple case studies to compare and illuminate different aspects of your research problem.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

Once you have developed your problem statement and research questions , you should be ready to choose the specific case that you want to focus on. A good case study should have the potential to:

• Provide new or unexpected insights into the subject
• Challenge or complicate existing assumptions and theories
• Propose practical courses of action to resolve a problem
• Open up new directions for future research

TipIf your research is more practical in nature and aims to simultaneously investigate an issue as you solve it, consider conducting action research instead.

Unlike quantitative or experimental research , a strong case study does not require a random or representative sample. In fact, case studies often deliberately focus on unusual, neglected, or outlying cases which may shed new light on the research problem.

Example of an outlying case studyIn the 1960s the town of Roseto, Pennsylvania was discovered to have extremely low rates of heart disease compared to the US average. It became an important case study for understanding previously neglected causes of heart disease.

However, you can also choose a more common or representative case to exemplify a particular category, experience or phenomenon.

Example of a representative case studyIn the 1920s, two sociologists used Muncie, Indiana as a case study of a typical American city that supposedly exemplified the changing culture of the US at the time.

While case studies focus more on concrete details than general theories, they should usually have some connection with theory in the field. This way the case study is not just an isolated description, but is integrated into existing knowledge about the topic. It might aim to:

• Exemplify a theory by showing how it explains the case under investigation
• Expand on a theory by uncovering new concepts and ideas that need to be incorporated
• Challenge a theory by exploring an outlier case that doesn’t fit with established assumptions

To ensure that your analysis of the case has a solid academic grounding, you should conduct a literature review of sources related to the topic and develop a theoretical framework . This means identifying key concepts and theories to guide your analysis and interpretation.

There are many different research methods you can use to collect data on your subject. Case studies tend to focus on qualitative data using methods such as interviews , observations , and analysis of primary and secondary sources (e.g., newspaper articles, photographs, official records). Sometimes a case study will also collect quantitative data.

Example of a mixed methods case studyFor a case study of a wind farm development in a rural area, you could collect quantitative data on employment rates and business revenue, collect qualitative data on local people’s perceptions and experiences, and analyze local and national media coverage of the development.

The aim is to gain as thorough an understanding as possible of the case and its context.

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

In writing up the case study, you need to bring together all the relevant aspects to give as complete a picture as possible of the subject.

How you report your findings depends on the type of research you are doing. Some case studies are structured like a standard scientific paper or thesis , with separate sections or chapters for the methods , results and discussion .

Others are written in a more narrative style, aiming to explore the case from various angles and analyze its meanings and implications (for example, by using textual analysis or discourse analysis ).

In all cases, though, make sure to give contextual details about the case, connect it back to the literature and theory, and discuss how it fits into wider patterns or debates.

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Degrees of freedom
• Null hypothesis
• Discourse analysis
• Control groups
• Mixed methods research
• Non-probability sampling
• Quantitative research
• Ecological validity

Research bias

• Rosenthal effect
• Implicit bias
• Cognitive bias
• Selection bias
• Negativity bias
• Status quo bias

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, November 20). What Is a Case Study? | Definition, Examples & Methods. Scribbr. Retrieved September 25, 2024, from https://www.scribbr.com/methodology/case-study/

Is this article helpful?

Shona McCombes

Other students also liked, primary vs. secondary sources | difference & examples, what is a theoretical framework | guide to organizing, what is action research | definition & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Get the Job
• Resumes and CVs
• Applications
• Cover Letters
• Professional References

Professional Licenses and Exams

• Get a Promotion
• Negotiation
• Professional Ethics
• Professionalism
• Dealing with Coworkers
• Dealing with Bosses

Communication Skills

Managing the office, disabilities, harassment and discrimination, unemployment.

• Career Paths
• Compare Careers
• Switching Careers
• Training and Certifications
• Start a Company
• Internships and Apprenticeships
• Entry Level Jobs
• College Degrees

Growth Trends for Related Jobs

How to answer case study questions.

A case study examination is composed of a set of questions surrounding a single problem, person, place or thing. Each problem attacks different angles of the subject matter to determine if the examinee comprehends the particular problem(s) and can solve them. Case study examinations can be used in business, technology, medicine, psychology, advertising, law, consulting and science. The questions are ideal for testing the knowledge of an individual who must prove his grasp of the subject matter in a particular field, i.e., the legal professional.

A week or two before the case study, locate a practice test and run through it a few times on your own. The more acquainted you are with the word arrangement of this type of test, the more comfortable you will be during either a written or oral case study assessment.

On the day of the case study test, relax and allow yourself to remember what you have learned from previous readings on the subject. You should possess a wealth of knowledge in this area from classes you have taken or work experience. Just use what you already know to answer the questions.

To answer questions on a case study examination in the best possible way, read or listen for the topic sentence. This is usually the first sentence in the introduction or first paragraph. This sentence presents the problem and thus holds key information; it tells you what the problem is about. Make sure that you understand the topic before reading the case study.

Next, read or focus on the meaning of the entire study question to become familiar with the nature and scope of the problem. Go over it again more slowly, a second time, if you do not understand it during the first read. Do not skip, skim or gloss over the content. Otherwise, vital information that you will need to answer the question might be missed. Note word arrangement, facts, figures or statistics in the text that will help come up with a solution. Think of different ways that you can answer the case study question and then determine the effects of each answer on your outcome.

Visualize the scenario or situation posed by the question. See it in your mind's eye as you review it. Consider the question as if it were an actual problem that will affect the lives of others. Write the best possible answer.

Slow down if you start to get confused. You may be moving too fast, trying to beat the clock. If this is the case, answer the easiest questions first and come back to the harder ones later. This will buy you some time and hopefully boost your confidence enough for you to calm down and can answer the more difficult questions with less anxiety.

Related Articles

How to tell if you are left-brained or right-brained →.

What Do I Do If I Forgot the Time of My Job Interview? →

Counseling and Interview Techniques →

How to Answer Questions in Narrative Form →

Subjects Needed to Become a Lawyer →

Do's and don'ts for interviewing techniques & speaking habits →.

• Job Interview and Career Guide

Juanita King began writing in 1971. She holds a master's degree in written communication and a master's degree in human development with a post-master's degree in counseling from National-Louis University.

Witthaya Prasongsin/Moment/GettyImages

• Job Descriptions
• Law Enforcement Job Descriptions
• Administrative Job Descriptions
• Healthcare Job Descriptions
• Sales Job Descriptions
• Fashion Job Descriptions
• Education Job Descriptions
• Salary Insights
• Journalism Salaries
• Healthcare Salaries
• Military Salaries
• Engineering Salaries
• Teaching Salaries
• Accessibility
• Privacy Notice
• Cookie Notice
• Copyright Policy
• Contact Us
• Find a Job
• Manage Preferences
• California Notice of Collection
• Terms of Use

• Free Case Studies
• Business Essays

Write My Case Study

Buy Case Study

Case Study Help

• Case Study For Sale
• Case Study Services
• Hire Writer

How to Answer Case Study: few tips

Here are a few tips on how to answer questions relating to case studies;

1)Read the case-study carefully: Case-studies will run up to many lines. So, do not think twice about spending time on reading the question. Read it the second time if [o haven’t understood clearly.

We Will Write a Custom Case Study Specifically For You For Only $13.90/page!

2)Read the questions relating to the case: After a first time reading of the case study, reading the questions pertaining to it, will help you know what to look out for in the case. Underline these instances in the case study for later reference.

3)Make notes of key points: While reading through your case study, make notes of key points (in bullet format).

This will help you to assess and analyses the facts for arriving at the right solution.

4)Look for cues: Sometimes, the answer may be hidden in the question itself. Certain Norms, or conjunctions in the sentence will give away the answer, if you read between them. Remember to look for these cues.

5)Background preparation: attempting case studies questions will be easier if you have enough exposure to solving these question types earlier.

Browse through detent portals or your university online interface to get better insights about case studies, and the mode to solve them.

Case studies are a vital part of testing management expertise and are woven into the distance learning MBA programs, which follow industry-standards. With the above tips, you can practice such type of questions with a new approach and get the expected results. Identification of issues ; problems There are three steps involved in the identification and analysis of issues and problems.

What are The Steps of Writing Content Analysis Case Study ?

Step 1 – overview of the case study (background context)

Understanding the background issues helps to understand the context of the case study. Read the case study to gain an overview and ask and answer the following questions as you read.

* What background facts influence the current problems? * What are the constraints or obstacles of the situation?

Step 2 – identifying the problems Identifying the major problems and their causes at this stage is vital to identify appropriate solutions later. Re-read the case study and summaries or list the issues and / or problems in your own words.

Make sure you: * sort he major problems from the minor problems * identify evidence from the case study which relates to each of the problems * identify underlying causes of the problems. A setup strategy is to represent the problems and their relationships as a mind.

Step 3 – linking theory to problems and case evidence Relating the identified issues / or problems to theory is vital when answering case studies.

This is where you demonstrate your knowledge of the theory in your course and your ability to relate it to practical situations.

If you are afraid to be expelled or think that you will not pass the plagiarism of your work, then it is better to ask for help in writing the case study with us.

Use your readings to select appropriate theories to match the identified problems. * Home * Identifying issues * Solutions * Recommendations I Antispasmodics can be a useful strategy to summaries / organism problems and to show their relationships to each other. The example below is a representation of the problems of the management case study.

Example I * Home * Identifying issues * Solutions * Recommendations I Integrating theory in a case strangulating relevant theory into your case study answer is vital. His allows you to demonstrate how theory relates to the actual issues / problems mound in the case study, as well as demonstrate your understanding of your course content. The following example shows how the theory and issues have been woven together. Example I * Home * Identifying issues * Solutions * Recommendations I Solution’s section evaluates potential solutions for the identified key problems. Often there is more than one solution, so it is useful to evaluate each solution in terms of its advantages and disadvantages.

This will also assist in determining your recommendations.

Things that may need to be considered are: * costs * time * sources * expertise. Structures section should be clear and concise. Recommended structure: * use headings and subheadings where possible * bullet points or numbered lists can also be used to list the advantages and disadvantages. Example I Recommendation’s section should outline your recommendations based upon the given solutions for each of the identified problems.

It may also need to include an action plan, egg what should be done by whom and the associated timeliness, but check with your teacher / lecturer for specific requirements.

Each recommendation would be realistic, ‘e practical and achievable, and be linked back to relevant and supporting theory. Structuralizes and subheadings should be used in this section. For example:communication * Staff constitutionalism the recommendations based on the identified solutions and supported by relevant theory. * Staff meetinghouse the recommendations based on the identified solutions and supported by relevant theory.

Leadership * Team bloodletting the theory. * Participative leadership storyline the recommendations based on the Identified solutions and supported by relevant theory. I

Related posts:

• Business Law Case Study Writing Tips
• Tips on Writing College Level Case Studies
• Tips on Writing a One Page Case Study
• Tips on Writing a Case Study for Publication
• Answer for case study
• Brose Case Study Answer
• Case Study and Its Answer of Nestle

Quick Links

Privacy Policy

Terms and Conditions

Testimonials

Our Services

Case Study Writing Services

Case Studies For Sale

Our Company

Welcome to the world of case studies that can bring you high grades! Here, at ACaseStudy.com, we deliver professionally written papers, and the best grades for you from your professors are guaranteed!

[email protected] 804-506-0782 350 5th Ave, New York, NY 10118, USA

Acasestudy.com © 2007-2019 All rights reserved.

Hi! I'm Anna

Would you like to get a custom case study? How about receiving a customized one?

Haven't Found The Case Study You Want?

For Only $13.90/page

What Is a Case Study?

What is a case study interview, how to prep for a case study interview, case study interview example questions, during the case study interview.

• Share on Twitter Share on Twitter
• Share on Facebook Share on Facebook
• Share on LinkedIn Share on LinkedIn

Forage puts students first. Our blog articles are written independently by our editorial team. They have not been paid for or sponsored by our partners. See our full  editorial guidelines .

Table of Contents

A case study interview isn’t your average interview. While most interviews ask you to give examples of how you use your skills on the job, in a case study interview, you’ll use those skills in front of the interviewer to solve a real-life problem.

It’s like auditioning for the school play. But instead of showing you can sing and dance, you’re using a case interview to show how you provide innovative solutions to pressing business problems. Not sure how to get ready for this kind of interview? We’ve got you covered. This guide explains how to prep for a case study interview.

Case studies are used across a variety of industries — everything from business to medicine. They are an in-depth examination, analysis, and critique of a real-world scenario the company experienced. People discuss the situation and explore what they learned while forming new solutions to try when they face a similar situation in the future and hope to improve their performance.

For example, doctors and nurses use case studies to improve how they diagnose and treat patients. Using real patient information, the medical team analyzes the case to see what the team may have missed and why they missed it. Learning from these errors helps the team better prepare for similar cases in the future to improve patient care.

While many industries use case studies to iterate and improve their performance, not every company uses case study interviews. This type of interview is very common at consulting companies (no matter what kind of consulting it is). But it’s not unusual for companies outside of consulting to use case interviews for marketing or operations roles.

In a case study interview, you’re given a real-world situation the company has faced and are tasked with analyzing it and suggesting a course of action.

Future Innovator in Training

Experience what it's like to work as a consultant in this free course from Accenture. Help your client redesign a web page and improve the user experience.

Avg. Time: 5-6 hours

Skills you’ll build: Prioritizing, planning, data analysis, error spotting, communication, strategic thinking

Businesses use case study interviews to assess your abilities in real-time. While you’ll probably draw on a variety of skills, most case study interviews assess:

• Strategic thinking
• Analytical skills
• Common sense

The advantage of a case study interview is that the interviewer can evaluate your ability in each of these areas and see how you’ll actually use them on the job.

What Is a Fit Interview?

Some people use “case study interview” and “fit interview” interchangeably. While a fit interview and a case study interview both ask behavioral interview questions , they are not the same thing.

A case study interview assesses your ability to do the job. It primarily evaluates how you approach business problems and use your skills to solve them. A fit interview is about company culture fit. The interviewer asks questions that assess how well you’ll fit into the company, like asking you questions about what motivates you or how you lead .

Fit and case interviews are important parts of the evaluation process. Getting the job done is just as critical as getting along with coworkers and supporting the company’s mission. Depending on where you interview, you may have one fit interview and one case study interview, or the fit interview may be a smaller part of the case study interview.

What You’ll Learn in a Case Study Interview

A case study interview allows the hiring manager to see your skills in action and how you approach business challenges. But it also teaches you a lot about the company (even if you’re doing most of the talking).

In a sense, you’re behaving as an employee during a case study interview. This gives you a peek behind the curtain, allowing you to see the company’s inner workings, like how they approach business problems and what they expect from you and your performance.

For example, you may offer a novel approach to solving a problem during a case interview. How does the interviewer react to it? Are they impressed? Surprised? Is there a scowl or frown on their face? Their reaction gives you insights into how the company will likely receive your solutions.

Introduction to Strategy Consulting

Discover what consulting is all about in this free course from BCG. Learn how to reframe questions and challenge assumptions.

Avg. Time: 2 hours

Skills you’ll build: Critical thinking, creativity, brainstorming

Depending on the specific company, you may have the case study interview questions in advance, but you may not. Whether you do or don’t, here’s how to prepare for a case study interview.

Conduct Deep Research

Good interview prep for any interview means researching the company. That includes things like learning more about the company’s mission and the challenges the industry faces. But when you’re preparing for a case study interview, your research needs to go deeper. 

When you answer a case study question, your answer has to be specific to the company’s clients or business objectives. For example, if you’re interviewing for a role in strategy consulting , your answer shouldn’t focus on aspects of human resources consulting (unless it’s particularly relevant).

Your research needs to include the kinds of clients the company works with and what types of problems the company solves. For example, the company may only consult for Fortune 100 companies that need accounting advice. Keep these facts in mind as you prepare for the interview.

Case Study Interview Formats

There are four types of case study interview formats:

• Candidate-led: The interviewer asks you a specific question (or gives you a prompt), and you walk the interviewer through a detailed answer.
• Employer-led: The interviewer leads you through a series of specific (and predetermined) prompts and questions, no matter your answers.
• Presentation: You’re given a problem in advance to create and present a detailed case study.
• Video: Similar to a presentation case study interview, you’ll create a video presentation of the case study.

Most companies will tell you in advance which style of case study interview you should prepare for. But if they don’t, reach out to your recruiter or check the company’s website. Many include the essential details you need to prepare for the case study interview.

Seek Out Company-Specific Tips

Speaking of companies and their websites, not only do many companies that use case study interviews tell you the format, they often include helpful tips and tricks to help candidates prepare. This includes what to expect, what the company is looking for skill-wise, and what kinds of responses they want. They may even have a few practice questions and videos you can use to help you prep.

Unlike other common interview questions , it’s not as easy to prepare an answer to case study interview questions. Even though you know it’s a case study interview, you don’t necessarily know the specifics of the case or what problems you’ll be asked to solve.

Cybersecurity

Work through a case experience in this free course from PwC Switzerland. Create a pitch, conduct a risk assessment, and explain your findings.

Skills you’ll build: Risk management frameworks, cause analysis, risk impact assessment, system security

That said, it’s likely your case study interview questions will cover one or several of these concepts:

• Entering new markets
• Increasing profits
• Cutting costs
• Turnarounds
• Mergers and acquisitions
• Pricing strategy
• Developing new products
• Industry analysis
• Competitive response

While there are many ways to answer case study interview questions, a few basic prep tips can help you get ready for every question.

In addition to what you usually bring to a job interview , make sure you bring a notepad and pen or pencil to a case study interview. Taking notes will help you better understand the questions and formulate your answers. It also gives you a place to calculate numbers and figures if you need to. Not every case study interview allows calculators, so you’ll need to be ready to do your calculations manually.

Ask Specific Questions

As you’re working through the case study, you can and should ask any clarifying questions you need. The interviewer wants to hear specific, detailed answers that solve the problem. So, whenever you’re unclear, ask a follow-up question to not only get what you need but to give the interviewer what they need. 

That said, your question(s) should be very specific. You need to verify exactly what the interview is asking so you can create an appropriate answer. Say the interviewer gives you a broad question: The client’s revenue is falling. How do you help them increase it? You can follow up with a very specific question or two to make sure you understand what the interviewer is asking:

You’re asking how I would help the client raise revenue, correct? Are you also asking how I would help them increase their profit and cut costs?

>>Related: 5 Top Questions to Ask in an Interview (and Why You Should Ask Them)

Talk Them Through It

A big part of the case study interview is seeing you in action. However, in this case, “see” really means “how you think.” Since the interviewer can’t hear your inner monologue, you’ll need to practice thinking out loud.

While the interviewer wants to hear your solution, they also want to hear how you got there. That means talking through your entire thought process. Instead of saying, “I’d do X,” you have to explain how you arrived at your decision while you’re getting there.

Because not everyone thinks out loud, it may feel unnatural to you, and you likely won’t be expected to do it on the job. But it’s crucial to practice this skill — and it is a skill — because the interviewer is expecting you to do it in a case study interview.

Want to give a case study a shot? Try out a Forage consulting virtual simulation program and gain the skills you’ll need to ace a case study interview.

Image credit: Canva

Related Posts

Interview angst here’s what not to say in an interview, how to prep for consulting interview questions, 22+ financial analyst interview questions (and answers), upskill with forage.

Gain job skills you can talk about in interviews.

Organizing Your Social Sciences Research Assignments

• Annotated Bibliography
• Analyzing a Scholarly Journal Article
• Group Presentations
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• Types of Structured Group Activities
• Group Project Survival Skills
• Leading a Class Discussion
• Multiple Book Review Essay
• Reviewing Collected Works
• Writing a Case Analysis Paper
• Writing a Case Study
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Reflective Paper
• Writing a Research Proposal
• Generative AI and Writing
• Acknowledgments

A case study research paper examines a person, place, event, condition, phenomenon, or other type of subject of analysis in order to extrapolate  key themes and results that help predict future trends, illuminate previously hidden issues that can be applied to practice, and/or provide a means for understanding an important research problem with greater clarity. A case study research paper usually examines a single subject of analysis, but case study papers can also be designed as a comparative investigation that shows relationships between two or more subjects. The methods used to study a case can rest within a quantitative, qualitative, or mixed-method investigative paradigm.

Case Studies. Writing@CSU. Colorado State University; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010 ; “What is a Case Study?” In Swanborn, Peter G. Case Study Research: What, Why and How? London: SAGE, 2010.

How to Approach Writing a Case Study Research Paper

General information about how to choose a topic to investigate can be found under the " Choosing a Research Problem " tab in the Organizing Your Social Sciences Research Paper writing guide. Review this page because it may help you identify a subject of analysis that can be investigated using a case study design.

However, identifying a case to investigate involves more than choosing the research problem . A case study encompasses a problem contextualized around the application of in-depth analysis, interpretation, and discussion, often resulting in specific recommendations for action or for improving existing conditions. As Seawright and Gerring note, practical considerations such as time and access to information can influence case selection, but these issues should not be the sole factors used in describing the methodological justification for identifying a particular case to study. Given this, selecting a case includes considering the following:

• The case represents an unusual or atypical example of a research problem that requires more in-depth analysis? Cases often represent a topic that rests on the fringes of prior investigations because the case may provide new ways of understanding the research problem. For example, if the research problem is to identify strategies to improve policies that support girl's access to secondary education in predominantly Muslim nations, you could consider using Azerbaijan as a case study rather than selecting a more obvious nation in the Middle East. Doing so may reveal important new insights into recommending how governments in other predominantly Muslim nations can formulate policies that support improved access to education for girls.
• The case provides important insight or illuminate a previously hidden problem? In-depth analysis of a case can be based on the hypothesis that the case study will reveal trends or issues that have not been exposed in prior research or will reveal new and important implications for practice. For example, anecdotal evidence may suggest drug use among homeless veterans is related to their patterns of travel throughout the day. Assuming prior studies have not looked at individual travel choices as a way to study access to illicit drug use, a case study that observes a homeless veteran could reveal how issues of personal mobility choices facilitate regular access to illicit drugs. Note that it is important to conduct a thorough literature review to ensure that your assumption about the need to reveal new insights or previously hidden problems is valid and evidence-based.
• The case challenges and offers a counter-point to prevailing assumptions? Over time, research on any given topic can fall into a trap of developing assumptions based on outdated studies that are still applied to new or changing conditions or the idea that something should simply be accepted as "common sense," even though the issue has not been thoroughly tested in current practice. A case study analysis may offer an opportunity to gather evidence that challenges prevailing assumptions about a research problem and provide a new set of recommendations applied to practice that have not been tested previously. For example, perhaps there has been a long practice among scholars to apply a particular theory in explaining the relationship between two subjects of analysis. Your case could challenge this assumption by applying an innovative theoretical framework [perhaps borrowed from another discipline] to explore whether this approach offers new ways of understanding the research problem. Taking a contrarian stance is one of the most important ways that new knowledge and understanding develops from existing literature.
• The case provides an opportunity to pursue action leading to the resolution of a problem? Another way to think about choosing a case to study is to consider how the results from investigating a particular case may result in findings that reveal ways in which to resolve an existing or emerging problem. For example, studying the case of an unforeseen incident, such as a fatal accident at a railroad crossing, can reveal hidden issues that could be applied to preventative measures that contribute to reducing the chance of accidents in the future. In this example, a case study investigating the accident could lead to a better understanding of where to strategically locate additional signals at other railroad crossings so as to better warn drivers of an approaching train, particularly when visibility is hindered by heavy rain, fog, or at night.
• The case offers a new direction in future research? A case study can be used as a tool for an exploratory investigation that highlights the need for further research about the problem. A case can be used when there are few studies that help predict an outcome or that establish a clear understanding about how best to proceed in addressing a problem. For example, after conducting a thorough literature review [very important!], you discover that little research exists showing the ways in which women contribute to promoting water conservation in rural communities of east central Africa. A case study of how women contribute to saving water in a rural village of Uganda can lay the foundation for understanding the need for more thorough research that documents how women in their roles as cooks and family caregivers think about water as a valuable resource within their community. This example of a case study could also point to the need for scholars to build new theoretical frameworks around the topic [e.g., applying feminist theories of work and family to the issue of water conservation].

Eisenhardt, Kathleen M. “Building Theories from Case Study Research.” Academy of Management Review 14 (October 1989): 532-550; Emmel, Nick. Sampling and Choosing Cases in Qualitative Research: A Realist Approach . Thousand Oaks, CA: SAGE Publications, 2013; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Seawright, Jason and John Gerring. "Case Selection Techniques in Case Study Research." Political Research Quarterly 61 (June 2008): 294-308.

Structure and Writing Style

The purpose of a paper in the social sciences designed around a case study is to thoroughly investigate a subject of analysis in order to reveal a new understanding about the research problem and, in so doing, contributing new knowledge to what is already known from previous studies. In applied social sciences disciplines [e.g., education, social work, public administration, etc.], case studies may also be used to reveal best practices, highlight key programs, or investigate interesting aspects of professional work.

In general, the structure of a case study research paper is not all that different from a standard college-level research paper. However, there are subtle differences you should be aware of. Here are the key elements to organizing and writing a case study research paper.

I.  Introduction

As with any research paper, your introduction should serve as a roadmap for your readers to ascertain the scope and purpose of your study . The introduction to a case study research paper, however, should not only describe the research problem and its significance, but you should also succinctly describe why the case is being used and how it relates to addressing the problem. The two elements should be linked. With this in mind, a good introduction answers these four questions:

• What is being studied? Describe the research problem and describe the subject of analysis [the case] you have chosen to address the problem. Explain how they are linked and what elements of the case will help to expand knowledge and understanding about the problem.
• Why is this topic important to investigate? Describe the significance of the research problem and state why a case study design and the subject of analysis that the paper is designed around is appropriate in addressing the problem.
• What did we know about this topic before I did this study? Provide background that helps lead the reader into the more in-depth literature review to follow. If applicable, summarize prior case study research applied to the research problem and why it fails to adequately address the problem. Describe why your case will be useful. If no prior case studies have been used to address the research problem, explain why you have selected this subject of analysis.
• How will this study advance new knowledge or new ways of understanding? Explain why your case study will be suitable in helping to expand knowledge and understanding about the research problem.

Each of these questions should be addressed in no more than a few paragraphs. Exceptions to this can be when you are addressing a complex research problem or subject of analysis that requires more in-depth background information.

II.  Literature Review

The literature review for a case study research paper is generally structured the same as it is for any college-level research paper. The difference, however, is that the literature review is focused on providing background information and  enabling historical interpretation of the subject of analysis in relation to the research problem the case is intended to address . This includes synthesizing studies that help to:

• Place relevant works in the context of their contribution to understanding the case study being investigated . This would involve summarizing studies that have used a similar subject of analysis to investigate the research problem. If there is literature using the same or a very similar case to study, you need to explain why duplicating past research is important [e.g., conditions have changed; prior studies were conducted long ago, etc.].
• Describe the relationship each work has to the others under consideration that informs the reader why this case is applicable . Your literature review should include a description of any works that support using the case to investigate the research problem and the underlying research questions.
• Identify new ways to interpret prior research using the case study . If applicable, review any research that has examined the research problem using a different research design. Explain how your use of a case study design may reveal new knowledge or a new perspective or that can redirect research in an important new direction.
• Resolve conflicts amongst seemingly contradictory previous studies . This refers to synthesizing any literature that points to unresolved issues of concern about the research problem and describing how the subject of analysis that forms the case study can help resolve these existing contradictions.
• Point the way in fulfilling a need for additional research . Your review should examine any literature that lays a foundation for understanding why your case study design and the subject of analysis around which you have designed your study may reveal a new way of approaching the research problem or offer a perspective that points to the need for additional research.
• Expose any gaps that exist in the literature that the case study could help to fill . Summarize any literature that not only shows how your subject of analysis contributes to understanding the research problem, but how your case contributes to a new way of understanding the problem that prior research has failed to do.
• Locate your own research within the context of existing literature [very important!] . Collectively, your literature review should always place your case study within the larger domain of prior research about the problem. The overarching purpose of reviewing pertinent literature in a case study paper is to demonstrate that you have thoroughly identified and synthesized prior studies in relation to explaining the relevance of the case in addressing the research problem.

III.  Method

In this section, you explain why you selected a particular case [i.e., subject of analysis] and the strategy you used to identify and ultimately decide that your case was appropriate in addressing the research problem. The way you describe the methods used varies depending on the type of subject of analysis that constitutes your case study.

If your subject of analysis is an incident or event . In the social and behavioral sciences, the event or incident that represents the case to be studied is usually bounded by time and place, with a clear beginning and end and with an identifiable location or position relative to its surroundings. The subject of analysis can be a rare or critical event or it can focus on a typical or regular event. The purpose of studying a rare event is to illuminate new ways of thinking about the broader research problem or to test a hypothesis. Critical incident case studies must describe the method by which you identified the event and explain the process by which you determined the validity of this case to inform broader perspectives about the research problem or to reveal new findings. However, the event does not have to be a rare or uniquely significant to support new thinking about the research problem or to challenge an existing hypothesis. For example, Walo, Bull, and Breen conducted a case study to identify and evaluate the direct and indirect economic benefits and costs of a local sports event in the City of Lismore, New South Wales, Australia. The purpose of their study was to provide new insights from measuring the impact of a typical local sports event that prior studies could not measure well because they focused on large "mega-events." Whether the event is rare or not, the methods section should include an explanation of the following characteristics of the event: a) when did it take place; b) what were the underlying circumstances leading to the event; and, c) what were the consequences of the event in relation to the research problem.

If your subject of analysis is a person. Explain why you selected this particular individual to be studied and describe what experiences they have had that provide an opportunity to advance new understandings about the research problem. Mention any background about this person which might help the reader understand the significance of their experiences that make them worthy of study. This includes describing the relationships this person has had with other people, institutions, and/or events that support using them as the subject for a case study research paper. It is particularly important to differentiate the person as the subject of analysis from others and to succinctly explain how the person relates to examining the research problem [e.g., why is one politician in a particular local election used to show an increase in voter turnout from any other candidate running in the election]. Note that these issues apply to a specific group of people used as a case study unit of analysis [e.g., a classroom of students].

If your subject of analysis is a place. In general, a case study that investigates a place suggests a subject of analysis that is unique or special in some way and that this uniqueness can be used to build new understanding or knowledge about the research problem. A case study of a place must not only describe its various attributes relevant to the research problem [e.g., physical, social, historical, cultural, economic, political], but you must state the method by which you determined that this place will illuminate new understandings about the research problem. It is also important to articulate why a particular place as the case for study is being used if similar places also exist [i.e., if you are studying patterns of homeless encampments of veterans in open spaces, explain why you are studying Echo Park in Los Angeles rather than Griffith Park?]. If applicable, describe what type of human activity involving this place makes it a good choice to study [e.g., prior research suggests Echo Park has more homeless veterans].

If your subject of analysis is a phenomenon. A phenomenon refers to a fact, occurrence, or circumstance that can be studied or observed but with the cause or explanation to be in question. In this sense, a phenomenon that forms your subject of analysis can encompass anything that can be observed or presumed to exist but is not fully understood. In the social and behavioral sciences, the case usually focuses on human interaction within a complex physical, social, economic, cultural, or political system. For example, the phenomenon could be the observation that many vehicles used by ISIS fighters are small trucks with English language advertisements on them. The research problem could be that ISIS fighters are difficult to combat because they are highly mobile. The research questions could be how and by what means are these vehicles used by ISIS being supplied to the militants and how might supply lines to these vehicles be cut off? How might knowing the suppliers of these trucks reveal larger networks of collaborators and financial support? A case study of a phenomenon most often encompasses an in-depth analysis of a cause and effect that is grounded in an interactive relationship between people and their environment in some way.

NOTE:   The choice of the case or set of cases to study cannot appear random. Evidence that supports the method by which you identified and chose your subject of analysis should clearly support investigation of the research problem and linked to key findings from your literature review. Be sure to cite any studies that helped you determine that the case you chose was appropriate for examining the problem.

IV.  Discussion

The main elements of your discussion section are generally the same as any research paper, but centered around interpreting and drawing conclusions about the key findings from your analysis of the case study. Note that a general social sciences research paper may contain a separate section to report findings. However, in a paper designed around a case study, it is common to combine a description of the results with the discussion about their implications. The objectives of your discussion section should include the following:

Reiterate the Research Problem/State the Major Findings Briefly reiterate the research problem you are investigating and explain why the subject of analysis around which you designed the case study were used. You should then describe the findings revealed from your study of the case using direct, declarative, and succinct proclamation of the study results. Highlight any findings that were unexpected or especially profound.

Explain the Meaning of the Findings and Why They are Important Systematically explain the meaning of your case study findings and why you believe they are important. Begin this part of the section by repeating what you consider to be your most important or surprising finding first, then systematically review each finding. Be sure to thoroughly extrapolate what your analysis of the case can tell the reader about situations or conditions beyond the actual case that was studied while, at the same time, being careful not to misconstrue or conflate a finding that undermines the external validity of your conclusions.

Relate the Findings to Similar Studies No study in the social sciences is so novel or possesses such a restricted focus that it has absolutely no relation to previously published research. The discussion section should relate your case study results to those found in other studies, particularly if questions raised from prior studies served as the motivation for choosing your subject of analysis. This is important because comparing and contrasting the findings of other studies helps support the overall importance of your results and it highlights how and in what ways your case study design and the subject of analysis differs from prior research about the topic.

Consider Alternative Explanations of the Findings Remember that the purpose of social science research is to discover and not to prove. When writing the discussion section, you should carefully consider all possible explanations revealed by the case study results, rather than just those that fit your hypothesis or prior assumptions and biases. Be alert to what the in-depth analysis of the case may reveal about the research problem, including offering a contrarian perspective to what scholars have stated in prior research if that is how the findings can be interpreted from your case.

Acknowledge the Study's Limitations You can state the study's limitations in the conclusion section of your paper but describing the limitations of your subject of analysis in the discussion section provides an opportunity to identify the limitations and explain why they are not significant. This part of the discussion section should also note any unanswered questions or issues your case study could not address. More detailed information about how to document any limitations to your research can be found here .

Suggest Areas for Further Research Although your case study may offer important insights about the research problem, there are likely additional questions related to the problem that remain unanswered or findings that unexpectedly revealed themselves as a result of your in-depth analysis of the case. Be sure that the recommendations for further research are linked to the research problem and that you explain why your recommendations are valid in other contexts and based on the original assumptions of your study.

V.  Conclusion

As with any research paper, you should summarize your conclusion in clear, simple language; emphasize how the findings from your case study differs from or supports prior research and why. Do not simply reiterate the discussion section. Provide a synthesis of key findings presented in the paper to show how these converge to address the research problem. If you haven't already done so in the discussion section, be sure to document the limitations of your case study and any need for further research.

The function of your paper's conclusion is to: 1) reiterate the main argument supported by the findings from your case study; 2) state clearly the context, background, and necessity of pursuing the research problem using a case study design in relation to an issue, controversy, or a gap found from reviewing the literature; and, 3) provide a place to persuasively and succinctly restate the significance of your research problem, given that the reader has now been presented with in-depth information about the topic.

Consider the following points to help ensure your conclusion is appropriate:

• If the argument or purpose of your paper is complex, you may need to summarize these points for your reader.
• If prior to your conclusion, you have not yet explained the significance of your findings or if you are proceeding inductively, use the conclusion of your paper to describe your main points and explain their significance.
• Move from a detailed to a general level of consideration of the case study's findings that returns the topic to the context provided by the introduction or within a new context that emerges from your case study findings.

Note that, depending on the discipline you are writing in or the preferences of your professor, the concluding paragraph may contain your final reflections on the evidence presented as it applies to practice or on the essay's central research problem. However, the nature of being introspective about the subject of analysis you have investigated will depend on whether you are explicitly asked to express your observations in this way.

Problems to Avoid

Overgeneralization One of the goals of a case study is to lay a foundation for understanding broader trends and issues applied to similar circumstances. However, be careful when drawing conclusions from your case study. They must be evidence-based and grounded in the results of the study; otherwise, it is merely speculation. Looking at a prior example, it would be incorrect to state that a factor in improving girls access to education in Azerbaijan and the policy implications this may have for improving access in other Muslim nations is due to girls access to social media if there is no documentary evidence from your case study to indicate this. There may be anecdotal evidence that retention rates were better for girls who were engaged with social media, but this observation would only point to the need for further research and would not be a definitive finding if this was not a part of your original research agenda.

Failure to Document Limitations No case is going to reveal all that needs to be understood about a research problem. Therefore, just as you have to clearly state the limitations of a general research study , you must describe the specific limitations inherent in the subject of analysis. For example, the case of studying how women conceptualize the need for water conservation in a village in Uganda could have limited application in other cultural contexts or in areas where fresh water from rivers or lakes is plentiful and, therefore, conservation is understood more in terms of managing access rather than preserving access to a scarce resource.

Failure to Extrapolate All Possible Implications Just as you don't want to over-generalize from your case study findings, you also have to be thorough in the consideration of all possible outcomes or recommendations derived from your findings. If you do not, your reader may question the validity of your analysis, particularly if you failed to document an obvious outcome from your case study research. For example, in the case of studying the accident at the railroad crossing to evaluate where and what types of warning signals should be located, you failed to take into consideration speed limit signage as well as warning signals. When designing your case study, be sure you have thoroughly addressed all aspects of the problem and do not leave gaps in your analysis that leave the reader questioning the results.

Case Studies. Writing@CSU. Colorado State University; Gerring, John. Case Study Research: Principles and Practices . New York: Cambridge University Press, 2007; Merriam, Sharan B. Qualitative Research and Case Study Applications in Education . Rev. ed. San Francisco, CA: Jossey-Bass, 1998; Miller, Lisa L. “The Use of Case Studies in Law and Social Science Research.” Annual Review of Law and Social Science 14 (2018): TBD; Mills, Albert J., Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Putney, LeAnn Grogan. "Case Study." In Encyclopedia of Research Design , Neil J. Salkind, editor. (Thousand Oaks, CA: SAGE Publications, 2010), pp. 116-120; Simons, Helen. Case Study Research in Practice . London: SAGE Publications, 2009;  Kratochwill,  Thomas R. and Joel R. Levin, editors. Single-Case Research Design and Analysis: New Development for Psychology and Education .  Hilldsale, NJ: Lawrence Erlbaum Associates, 1992; Swanborn, Peter G. Case Study Research: What, Why and How? London : SAGE, 2010; Yin, Robert K. Case Study Research: Design and Methods . 6th edition. Los Angeles, CA, SAGE Publications, 2014; Walo, Maree, Adrian Bull, and Helen Breen. “Achieving Economic Benefits at Local Events: A Case Study of a Local Sports Event.” Festival Management and Event Tourism 4 (1996): 95-106.

Writing Tip

At Least Five Misconceptions about Case Study Research

Social science case studies are often perceived as limited in their ability to create new knowledge because they are not randomly selected and findings cannot be generalized to larger populations. Flyvbjerg examines five misunderstandings about case study research and systematically "corrects" each one. To quote, these are:

Misunderstanding 1 :  General, theoretical [context-independent] knowledge is more valuable than concrete, practical [context-dependent] knowledge. Misunderstanding 2 :  One cannot generalize on the basis of an individual case; therefore, the case study cannot contribute to scientific development. Misunderstanding 3 :  The case study is most useful for generating hypotheses; that is, in the first stage of a total research process, whereas other methods are more suitable for hypotheses testing and theory building. Misunderstanding 4 :  The case study contains a bias toward verification, that is, a tendency to confirm the researcher’s preconceived notions. Misunderstanding 5 :  It is often difficult to summarize and develop general propositions and theories on the basis of specific case studies [p. 221].

While writing your paper, think introspectively about how you addressed these misconceptions because to do so can help you strengthen the validity and reliability of your research by clarifying issues of case selection, the testing and challenging of existing assumptions, the interpretation of key findings, and the summation of case outcomes. Think of a case study research paper as a complete, in-depth narrative about the specific properties and key characteristics of your subject of analysis applied to the research problem.

Flyvbjerg, Bent. “Five Misunderstandings About Case-Study Research.” Qualitative Inquiry 12 (April 2006): 219-245.

• << Previous: Writing a Case Analysis Paper
• Next: Writing a Field Report >>
• Last Updated: Jun 3, 2024 9:44 AM
• URL: https://libguides.usc.edu/writingguide/assignments

• Writing well

How to write a case study response

• Starting well
• How to write an annotated bibliography
• How to write a critique
• How to write an empirical article
• How to write an essay
• How to write a literature review
• How to write a reflective task
• How to write a report
• Finishing well

Before you start writing, you need to carefully read the case study and make a note of the main issues and problems involved as well as the main stakeholders (persons or groups of persons who have an interest in the case).

Case study elements

A case study response would include the following elements:

Introduction

Introduce the main purpose of the case study and briefly outline the overall problem to be solved.

Description

Write a brief description of the case under discussion giving an outline of the main issues involved. Always assume that your reader knows nothing of the assignment task and provide enough information to give a context for your discussion of the issues.

Discuss the issues raised one by one, using information gained from your research of the academic literature.

Your discussion may include:

• an outline of the issue and its implications for or relationship to different stakeholders
• how that issue links to theories or research in the academic literature
• suggested solutions or ideas
• evaluation of the solutions or ideas for this particular case.

Conclusion / Recommendations

Finally, sum up the conclusions that you have come to and give recommendations to resolve the case. Give reasons for your recommendations.

• Carefully read the case and noted the main issues and stakeholders in the case?
• Written a brief description of the case to give your readers a context for the main issues?
• Discussed each issue with reference to the academic literature?
• Evaluated the solutions or ideas for each issue to find the ones most suitable?
• Made final recommendations of how to resolve the case?
• Used a well structured introduction, body and conclusion?
• Cited and referenced all of the work by other people?
• Used correct grammar, spelling and punctuation, clear presentation and appropriate reference style?

Further information

• Monash University: Writing a case study
• University of New South Wales: Writing a Case Study Report in Engineering

Global links and information

• Referencing and using sources
• Background and development
• Changes to QUT cite|write
• Need more help?
• Current students
• Current staff
• TEQSA Provider ID: PRV12079 (Australian University)
• CRICOS No. 00213J
• ABN 83 791 724 622
• Last modified: 28-May-2024
• Accessibility
• Right to Information
• Feedback and suggestions

Acknowledgement of Traditional Owners

QUT acknowledges the Traditional Owners of the lands where QUT now stands.

Online Case Study Answer Generator for Students

Here Is Your Case Study Analysis

If you want to quickly and effectively carry out case study analyses, you’ve come to the right place. Just for you, we’ve created a free AI-powered tool that can analyze case studies on any subject!

Our app will be the perfect solution for those who don’t want to spend a ton of time structuring their texts and looking for examples. Use it to save time and nerves!

• ️🎉 Benefits of Our Generator
• ️🤖 How to Use
• ️✨ Case Study Definition
• ️🔎 Structure of a Case Study
• ️✍️ Writing Steps
• ️🔝 Top 12 Topics & Examples
• ️🔗 References

🎉 Benefits of Our Case Study Analysis Generator

Our generator is one of the best, and there are many reasons for us to say so:

🤖 How to Use Our Case Study Answer Generator

Getting a case study analysis has never been simpler—see for yourself!

• Paste your case study into the field.
• Add questions or issues you need to resolve in your analysis.
• Press “Analyze now.”
• Receive the results!

Keep in mind that the answers given by the tool are to be used for reference purposes only.

✨ Case Study Analysis Definition

A case study analysis aims to examine a problem and find a solution. It is traditionally used in business and other spheres, like education, healthcare, and social sciences. The main feature of such research is that it’s rooted in a real-world context.

Researchers use direct observations, interviews, tests, and samples to gather data for their case studies. This information is then applied to develop solutions and recommendations backed with evidence.

🔎 Structure of a Case Study Analysis

Usually, a case study analysis comprises 6 parts. Each one is dedicated to a certain aspect and serves its respective aim. Let’s go through them and see how they differ.

Introduction

An introduction defines the context of the examined topic and provides substantial background on the case study’s subject. When you write it, keep in mind the following questions:

• What is your case study about?
• What is the primary reason for your research?
• Why is it essential to conduct it?

Problem Statement

The next part introduces the central problem the study will be concentrating on. Typically, it’s concerned with a challenge faced by a person or organization in question. The problem statement provides a clear focus for the whole research.

Now, it’s time for the most gripping part—the analysis itself. When it comes to business problems, students can employ various approaches:

• SWOT analysis  evaluates the firm’s strengths, weaknesses, opportunities, and threats.
• Descriptive statistics recaps the main characteristics of the collected data using various measures.
• Identification of causes approach looks for the underlying reasons behind the issue.
• Stakeholder researches the perspectives of different stakeholders involved in the case.

This part proposes several ways to settle the issue in question. The solutions must be pragmatic and achievable. It’s also worth to mention their pros and cons and thus identify the most potent ones.

Recommendations

This part revolves around the best potential solution to the problem determined in the previous section. It explains how to execute it practically and how it will help eliminate the issue. It may also propose ways to deal with other minor dilemmas involved in the case.

Conclusions

Now, it’s time for the final section of the analysis: your  conclusions . Here is what to do:

• Restate the results of your case study analysis and elucidate how they relate to the research’s main problem.
• Be sure to underline how vital your study is and how it helps make the issue more controllable.
• Make further proposals based on your findings.

✍️ How to Write a Case Study

Now you know what to include in your case study. But how do you write one that is truly outstanding? Just follow our step-by-step guide:

1. Pick a Case to Explore

Choosing the right topic is essential. You need to do it early on to ensure that the research subject is sufficiently explored.

For example, suppose you want to examine how COVID-19 has affected the hospitality sector. In that case, you can choose either a representative case, such as a large hotel chain, or an outlier case, such as a small Bed and Breakfast that has managed to survive the pandemic. The latter case may sound more interesting, but if there’s not enough information available on it, it’s best to choose the former.

2. Formulate a Problem Statement

Now, you should clearly and concisely formulate the central problem you will be focusing on. To do it, answer the 5 Ws:

• What is the problem you’re researching?
• Who is affected by it?
• Where does it occur?
• When did the problem arise?
• Why is this issue significant?

If you need help with this part of your analysis, you can always use our research problem generator .

3. Gather Evidence & Collect Data

Data gathering can be done through both primary and secondary sources of information . You can use a range of research techniques, such as observations, surveys, and interviews. It is crucial to make sure the data you’ve collected is pertinent to the case study.

4. Describe Your Findings & Analyze Them

Next, you analyze trends and themes in your data. This analysis must be supported by facts and evidence. Use various analysis methods to make your study more in-depth.

5. Provide Solutions & Recommendations

Develop several possible solutions using the information you’ve gathered. Once you’ve done it, answer the following questions:

• What are the pros and cons of these solutions?
• Which one can be the most beneficial?
• How can the entity you’re analyzing implement it in practice?

The more detailed your recommendations are, the better. If possible, try to include aspects such as timeline, resource allocation, and KPIs for monitoring.

🔝 Top 12 Case Study Topics & Examples

Want inspiration for your analysis? Or maybe you need help picking a case to explore? Check out this list of topics with examples!

• Operations and Information Management: A Case Study of CC Music
• Netflix and Blockbuster: Case Study
• Strategic Planning Case Study: Process Management
• HRM Incident: Case Study Analysis
• Case Study Summary: Hiring a Sustainable Development Specialist
• Organizational Change: Qatargas Case Study
• Childhood Development Case Study
• Case Study of Engstrom Auto Mirror Plant and Workplace
• Strategic Marketing: Amazon Go Case Study
• Cognitive Behavioral Therapy: Case Study
• Social Determinants of Health: Case Study
• Recovering Supply Chain Operations: A Case Study of Nissan

Now you know how to complete a case study! Remember that the tiring process of analyzing can be effectively streamlined if you use our free case study answer generator. Try it out—you won’t regret it!

We also recommend using our transition words maker and personal statement generator to enhance your writing.

❓ Case Study Analysis Generator: FAQ

❓ what questions to answer in a case study.

A case study must either prove or disprove an existing theory. It also aims to find a solution to the research’s central question. This question can vary depending on your topic and subject. You present the answer in your research findings and conclusions.

❓ How Do You Write a Case Study Analysis?

First, you introduce your case and provide its background. Then, you gather information and analyze it to develop several solutions. Finally, you propose the best solution and give recommendations on how to implement it. Also, remember to explain how your case study will deepen the existing knowledge.

❓ What Are the 4 Most Important Parts of Case Study?

Every case study begins with the introduction of a topic and its background. Then, you present an analysis of sources that can provide knowledge on the case. The third part is the analysis of collected data. Your case study ends with conclusions based on your findings.

❓ What Are Some Examples of Case Studies?

Case studies are frequently used in psychology to shed light on peculiar circumstances. Famous case study examples include Sigmund Freud’s Little Hans as well as John Martin Marlow’s study of Phineas Gage, the man who had a railroad spike driven through his brain.

Updated: Aug 21st, 2024

🔗 References

• Case Study: Definition, Examples, Types, and How to Write: Verywell Mind
• What Is a Case Study?: Evidence Based Nursing
• What the Case Study Method Really Teaches: Harvard Business Review
• Using Case Studies to Teach: Boston University
• What Is a Case Study? Definition, Elements and 15 Examples: Indeed
• Writing a Case Study: University of Southern California
• Writing a Case Study – Student Academic Success: Monash University

100 Best Case Study Questions for Your Next Customer Spotlight

Updated: November 29, 2022

Published: March 24, 2016

Case studies and testimonials are helpful to have in your arsenal. But to build an effective library, you need to ask the right case study questions. You also need to know how to write a case study .

Case studies are customers' stories that your sales team can use to share relevant content with prospects . Not only that, but case studies help you earn a prospect's trust, show them what life would be like as your customer, and validate that your product or service works for your clients.

Before you start building your library of case studies, check out our list of 100 case study questions to ask your clients. With this helpful guide, you'll have the know-how to build your narrative using the " Problem-Agitate-Solve " Method.

What makes a good case study questionnaire?

The ultimate list of case study questions, how to ask your customer for a case study, creating an effective case study.

Certain key elements make up a good case study questionnaire.

A questionnaire should never feel like an interrogation. Instead, aim to structure your case study questions like a conversation. Some of the essential things that your questionnaire should cover include:

• The problem faced by the client before choosing your organization.
• Why they chose your company.
• How your product solved the problem clients faced.
• The measurable results of the service provided.
• Data and metrics that prove the success of your service or product, if possible.

You can adapt these considerations based on how your customers use your product and the specific answers or quotes that you want to receive.

What makes a good case study question?

A good case study question delivers a powerful message to leads in the decision stage of your prospective buyer's journey.

Since your client has agreed to participate in a case study, they're likely enthusiastic about the service you provide. Thus, a good case study question hands the reins over to the client and opens a conversation.

Try asking open-ended questions to encourage your client to talk about the excellent service or product you provide.

Free Case Study Templates

Tell us about yourself to access the templates..

Categories for the Best Case Study Questions

• Case study questions about the customer's business
• Case study questions about the environment before the purchase
• Case study questions about the decision process
• Case study questions about the customer's business case
• Case study questions about the buying team and internal advocates
• Case study questions about customer success
• Case study questions about product feedback
• Case study questions about willingness to make referrals
• Case study question to prompt quote-worthy feedback
• Case study questions about the customers' future goals

Showcase your company's success using these three free case study templates.

• Data-Driven Case Study Template
• Product-Specific Case Study Template
• General Case Study Template

Download Free

All fields are required.

You're all set!

Click this link to access this resource at any time.

Case Study Interview Questions About the Customer's Business

Knowing the customer's business is an excellent way of setting the tone for a case study.

Use these questions to get some background information about the company and its business goals. This information can be used to introduce the business at the beginning of the case study — plus, future prospects might resonate with their stories and become leads for you.

• Would you give me a quick overview of [company]? This is an opportunity for the client to describe their business in their own words. You'll get useful background information and it's an easy prompt to get the client talking.
• Can you describe your role? This will give you a better idea of the responsibilities they are subject to.
• How do your role and team fit into the company and its goals? Knowing how the team functions to achieve company goals will help you formulate how your solution involves all stakeholders.
• How long has your company been in business? Getting this information will help the reader gauge if pain points are specific to a startup or new company vs. a veteran company.
• How many employees do you have? Another great descriptor for readers to have. They can compare the featured company size with their own.
• Is your company revenue available? If so, what is it? This will give your readers background information on the featured company's gross sales.
• Who is your target customer? Knowing who the target audience is will help you provide a better overview of their market for your case study readers.
• How does our product help your team or company achieve its objectives? This is one of the most important questions because it is the basis of the case study. Get specifics on how your product provided a solution for your client. You want to be able to say "X company implemented our solution and achieved Y. "
• How are our companies aligned (mission, strategy, culture, etc.)? If any attributes of your company's mission or culture appealed to the client, call it out.

How many people are on your team? What are their roles? This will help describe key players within the organization and their impact on the implementation of your solution.

Case Study Interview Questions About the Environment Before the Purchase

A good case study is designed to build trust. Ask clients to describe the tools and processes they used before your product or service. These kinds of case study questions will highlight the business' need they had to fulfill and appeal to future clients.

• What was your team's process prior to using our product? This will give the reader a baseline to compare the results for your company's product.
• Were there any costs associated with the process prior to using our product? Was it more expensive? Was it worth the cost? How did the product affect the client's bottom line? This will be a useful metric to disclose if your company saved the client money or was more cost-efficient.
• What were the major pain points of your process prior to using our product? Describe these obstacles in detail. You want the reader to get as much information on the problem as possible as it sets up the reasoning for why your company's solution was implemented.
• Did our product replace a similar tool or is this the first time your team is using a product like this? Were they using a similar product? If so, having this information may give readers a reason to choose your brand over the competition.
• What other challenges were you and your team experiencing prior to using our product? The more details you can give readers regarding the client's struggles, the better. You want to paint a full picture of the challenges the client faced and how your company resolved them.
• Were there any concerns about how your customers would be impacted by using our product? Getting answers to this question will illustrate to readers the client's concerns about switching to your service. Your readers may have similar concerns and reading how your client worked through this process will be helpful.
• Why didn't you buy our product or a similar product earlier? Have the client describe any hesitations they had using your product. Their concerns may be relatable to potential leads.
• Were there any "dealbreakers" involved in your decision to become a customer? Describing how your company was able to provide a solution that worked within those parameters demonstrates how accommodating your brand is and how you put the customer first. It's also great to illustrate any unique challenges the client had. This better explains their situation to the reader.
• Did you have to make any changes you weren't anticipating once you became a customer? Readers of your case study can learn how switching to your product came with some unexpected changes (good or bad) and how they navigated them. If you helped your client with troubleshooting, ask them to explain that here.

How has your perception of the product changed since you've become a customer? Get the interviewee to describe how your product changed how they do business. This includes how your product accomplished what they previously thought was impossible.

Case Study Interview Questions About the Decision Process

Readers of the case study will be interested in which factors influenced the decision-making process for the client. If they can relate to that process, there's a bigger chance they'll buy your product.

The answers to these questions will help potential customers through their decision-making process.

• How did you hear about our product? If the client chose to work with you based on a recommendation or another positive case study, include that. It will demonstrate that you are a trusted brand with an established reputation for delivering results.
• How long had you been looking for a solution to this problem? This will add to the reader's understanding of how these particular challenges impacted the company before choosing your product.
• Were you comparing alternative solutions? Which ones? This will demonstrate to readers that the client explored other options before choosing your company.
• Would you describe a few of the reasons you decided to buy our product? Ask the interviewee to describe why they chose your product over the competition and any benefits your company offered that made you stand out.
• What were the criteria you used when deciding to buy our product? This will give readers more background insight into the factors that impacted their decision-making process.
• Were there any high-level initiatives or goals that prompted the decision to buy? For example, was this decision motivated by a company-wide vision? Prompt your clients to discuss what lead to the decision to work with you and how you're the obvious choice.
• What was the buying process like? Did you notice anything exceptional or any points of friction? This is an opportunity for the client to comment on how seamless and easy you make the buying process. Get them to describe what went well from start to finish.
• How would you have changed the buying process, if at all? This is an opportunity for you to fine-tune your process to accommodate future buyers.
• Who on your team was involved in the buying process? This will give readers more background on the key players involved from executives to project managers. With this information, readers can see who they may potentially need to involve in the decision-making process on their teams.

Case Study Interview Questions About the Customer's Business Case

Your case study questions should ask about your product or solution's impact on the customer's employees, teams, metrics, and goals. These questions allow the client to praise the value of your service and tell others exactly what benefits they derived from it.

When readers review your product or service's impact on the client, it enforces the belief that the case study is credible.

• How long have you been using our product? This will help readers gauge how long it took to see results and your overall satisfaction with the product or service.
• How many different people at your company use our product? This will help readers gauge how they can adapt the product to their teams if similar in size.
• Are there multiple departments or teams using our product? This will demonstrate how great of an impact your product has made across departments.
• How do you and your team currently use the product? What types of goals or tasks are you using the product to accomplish? Get specifics on how the product actively helps the client achieve their goals.
• If other teams or departments are using our product, do you know how they're using it? With this information, leads can picture how they can use your product across their teams and how it may improve their workflow and metrics.
• What was the most obvious advantage you felt our product offered during the sales process? The interviewee should explain the benefits they've gained from using your product or service. This is important for convincing other leads you are better than the competition.
• Were there any other advantages you discovered after using the product more regularly? Your interviewee may have experienced some additional benefits from using your product. Have them describe in detail what these advantages are and how they've helped the company improve.
• Are there any metrics or KPIs you track with our product? What are they? The more numbers and data the client can provide, the better.
• Were you tracking any metrics prior to using our product? What were they? This will allow readers to get a clear, before-and-after comparison of using your product.
• How has our product impacted your core metrics? This is an opportunity for your clients to drive home how your product assisted them in hitting their metrics and goals.

Case Study Interview Questions About the Buying Team and Internal Advocates

See if there are any individuals at the customer's company who are advocates for your product.

• Are there any additional team members you consider to be advocates for our product? For example, does anyone stick out as a "power user" or product expert on your team? You may want to interview and include these power users in your case study as well. Consider asking them for tips on using your service or product.
• Is there anyone else on your team you think we should talk to? Again, the more people can share their experience using your product, the better.
• Are there any team members who you think might not be the biggest fans of our product or who might need more training? Providing extra support to those struggling with your product may improve their user experience and turn into an opportunity to not only learn about their obstacles but turn them into a product fan
• Would you share some details about how your team implemented our product? Get as much information as possible about the rollout. Hopefully, they'll gush about how seamless the process was.
• Who from your company was involved in implementing our product? This will give readers more insight into who needs to be involved for a successful rollout of their own.
• Were there any internal risks or additional costs involved with implementing our product? If so, how did you address them? This will give insight into the client's process and rollout and this case study question will likely provide tips on what potential leads should be on the lookout for.
• Is there a training process in place for your team's use of our product? If so, what does it look like? If your company provided support and training to the client, have them describe that experience.
• About how long does it take a new team member to get up to speed with our product? This will help leads determine how much time it will take to onboard an employee to your using your product. If a new user can quickly get started seamlessly, it bodes well for you.
• What was your main concern about rolling this product out to your company? Describing their challenges in detail will provide readers with useful insight.

Case Study Interview Questions About Customer Success

Has the customer found success with your product? Ask these questions to learn more.

• By using our product can you measure any reduced costs? If it has, you'll want to emphasize those savings in your case study.
• By using our product can you measure any improvements in productivity or time savings? Any metrics or specific stories your interviewee can provide will help demonstrate the value of your product.
• By using our product can you measure any increases in revenue or growth? Again, say it with numbers and data whenever possible.
• Are you likely to recommend our product to a friend or colleague? Recommendations from existing customers are some of the best marketing you can get.
• How has our product impacted your success? Your team's success? Getting the interviewee to describe how your product played an integral role in solving their challenges will show leads that they can also have success using your product.
• In the beginning, you had XYZ concerns; how do you feel about them now? Let them explain how working with your company eliminated those concerns.
• I noticed your team is currently doing XYZ with our product. Tell me more about how that helps your business. Illustrate to your readers how current customers are using your product to solve additional challenges. It will convey how versatile your product is.
• Have you thought about using our product for a new use case with your team or at your company? The more examples of use cases the client can provide, the better.
• How do you measure the value our product provides? Have the interviewee illustrate what metrics they use to gauge the product's success and how. Data is helpful, but you should go beyond the numbers. Maybe your product improved company morale and how teams work together.

Case Study Interview Questions About Product Feedback

Ask the customer if they'd recommend your product to others. A strong recommendation will help potential clients be more open to purchasing your product.

• How do other companies in this industry solve the problems you had before you purchased our product? This will give you insight into how other companies may be functioning without your product and how you can assist them.
• Have you ever talked about our product to any of your clients or peers? What did you say? This can provide you with more leads and a chance to get a referral.
• Why would you recommend our product to a friend or client? Be sure they pinpoint which features they would highlight in a recommendation.
• Can you think of any use cases your customers might have for our product? Similar industries may have similar issues that need solutions. Your interviewee may be able to provide a use case you haven't come up with.
• What is your advice for other teams or companies who are tackling problems similar to those you had before you purchased our product? This is another opportunity for your client to talk up your product or service.
• Do you know someone in X industry who has similar problems to the ones you had prior to using our product? The client can make an introduction so you can interview them about their experience as well.
• I noticed you work with Company Y. Do you know if they are having any pain points with these processes? This will help you learn how your product has impacted your client's customers and gain insight into what can be improved.
• Does your company participate in any partner or referral programs? Having a strong referral program will help you increase leads and improve customer retention.
• Can I send you a referral kit as a thank-you for making a referral and give you the tools to refer someone to us? This is a great strategy to request a referral while rewarding your existing customers.
• Are you interested in working with us to produce additional marketing content? The more opportunities you can showcase happy customers, the better.

Case Study Interview Questions About Willingness to Make Referrals

• How likely are you to recommend our product to a friend or client? Ideally, they would definitely refer your product to someone they know.
• Can you think of any use cases your customers might have for our product? Again, your interviewee is a great source for more leads. Similar industries may have similar issues that need solutions. They may be able to provide a use case you haven't come up with.
• I noticed you work with Company Y; do you know if they are having any pain points with these processes? This will help you learn how your product has impacted your client's customers and gain insight into what can be improved.

Case Study Interview Questions to Prompt Quote-Worthy Feedback

Enhance your case study with quotable soundbites from the customer. By asking these questions, prospects have more insight into other clients and their success with your product — which helps build trust.

• How would you describe your process in one sentence prior to using our product? Ideally, this sentence would quickly and descriptively sum up the most prominent pain point or challenge with the previous process.
• What is your advice to others who might be considering our product? Readers can learn from your customer's experience.
• What would your team's workflow or process be like without our product? This will drive home the value your product provides and how essential it is to their business.
• Do you think the investment in our product was worthwhile? Why? Have your customer make the case for the value you provide.
• What would you say if we told you our product would soon be unavailable? What would this mean to you? Again, this illustrates how integral your product is to their business.
• How would you describe our product if you were explaining it to a friend? Your customers can often distill the value of your product to their friends better than you can.
• What do you love about your job? Your company? This gives the reader more background on your customer and their industry.
• What was the worst part of your process before you started using our product? Ideally, they'd reiterate how your product helped solve this challenge.
• What do you love about our product? Another great way to get the customer's opinion about what makes your product worth it.
• Why do you do business with us? Hopefully, your interviewee will share how wonderful your business relationship is.

Case Study Interview Questions About the Customers' Future Goals

Ask the customer about their goals, challenges, and plans for the future. This will provide insight into how a business can grow with your product.

• What are the biggest challenges on the horizon for your industry? Chances are potential leads within the same industry will have similar challenges.
• What are your goals for the next three months? Knowing their short-term goals will enable your company to get some quick wins for the client.
• How would you like to use our product to meet those challenges and goals? This will help potential leads understand that your product can help their business as they scale and grow.
• Is there anything we can do to help you and your team meet your goals? If you haven't covered it already, this will allow your interviewee to express how you can better assist them.
• Do you think you will buy more, less, or about the same amount of our product next year? This can help you gauge how your product is used and why.
• What are the growth plans for your company this year? Your team? This will help you gain insight into how your product can help them achieve future goals.
• How can we help you meet your long-term goals? Getting specifics on the needs of your clients will help you create a unique solution designed for their needs.
• What is the long-term impact of using our product? Get their feedback on how your product has created a lasting impact.
• Are there any initiatives that you personally would like to achieve that our product or team can help with? Again, you want to continue to provide products that help your customers excel.
• What will you need from us in the future? This will help you anticipate the customer's business needs.
• Is there anything we can do to improve our product or process for working together in the future? The more feedback you can get about what is and isn't working, the better.

Before you can start putting together your case study, you need to ask your customer's permission.

If you have a customer who's seen success with your product, reach out to them. Use this template to get started:

Thank you & quick request

Hi [customer name],

Thanks again for your business — working with you to [solve X, launch Y, take advantage of Z opportunity] has been extremely rewarding, and I'm looking forward to more collaboration in the future.

[Name of your company] is building a library of case studies to include on our site. We're looking for successful companies using [product] to solve interesting challenges, and your team immediately came to mind. Are you open to [customer company name] being featured?

It should be a lightweight process — [I, a product marketer] will ask you roughly [10, 15, 20] questions via email or phone about your experience and results. This case study will include a blurb about your company and a link to your homepage (which hopefully will make your SEO team happy!)

In any case, thank you again for the chance to work with you, and I hope you have a great week.

[Your name]

If one of your customers has recently passed along some praise (to you, their account manager, your boss; on an online forum; to another potential customer; etc.), then send them a version of this email:

Hey [customer name],

Thanks for the great feedback — I'm really glad to hear [product] is working well for you and that [customer company name] is getting the results you're looking for.

My team is actually in the process of building out our library of case studies, and I'd love to include your story. Happy to provide more details if you're potentially interested.

Either way, thank you again, and I look forward to getting more updates on your progress.

You can also find potential case study customers by usage or product data. For instance, maybe you see a company you sold to 10 months ago just bought eight more seats or upgraded to a new tier. Clearly, they're happy with the solution. Try this template:

I saw you just [invested in our X product; added Y more users; achieved Z product milestone]. Congratulations! I'd love to share your story using [product] with the world -- I think it's a great example of how our product + a dedicated team and a good strategy can achieve awesome results.

Are you open to being featured? If so, I'll send along more details.

Case Study Benefits

• Case studies are a form of customer advocacy.
• Case studies provide a joint-promotion opportunity.
• Case studies are easily sharable.
• Case studies build rapport with your customers.
• Case studies are less opinionated than customer reviews.

1. Case studies are a form of customer advocacy.

If you haven't noticed, customers aren't always quick to trust a brand's advertisements and sales strategies.

With every other brand claiming to be the best in the business, it's hard to sort exaggeration from reality.

This is the most important reason why case studies are effective. They are testimonials from your customers of your service. If someone is considering your business, a case study is a much more convincing piece of marketing or sales material than traditional advertising.

2. Case studies provide a joint-promotion opportunity.

Your business isn't the only one that benefits from a case study. Customers participating in case studies benefit, too.

Think about it. Case studies are free advertisements for your customers, not to mention the SEO factor, too. While they're not promoting their products or services, they're still getting the word out about their business. And, the case study highlights how successful their business is — showing interested leads that they're on the up and up.

3. Case studies are easily sharable.

No matter your role on the sales team, case studies are great to have on hand. You can easily share them with leads, prospects, and clients.

Whether you embed them on your website or save them as a PDF, you can simply send a link to share your case study with others. They can share that link with their peers and colleagues, and so on.

Case studies can also be useful during a sales pitch. In sales, timing is everything. If a customer is explaining a problem that was solved and discussed in your case study, you can quickly find the document and share it with them.

4. Case studies build rapport with your customers.

While case studies are very useful, they do require some back and forth with your customers to obtain the exact feedback you're looking for.

Even though time is involved, the good news is this builds rapport with your most loyal customers. You get to know them on a personal level, and they'll become more than just your most valuable clients.

And, the better the rapport you have with them, the more likely they'll be to recommend your business, products, or services to others.

5. Case studies are less opinionated than customer reviews.

Data is the difference between a case study and a review. Customer reviews are typically based on the customer's opinion of your brand. While they might write a glowing review, it's completely subjective and there's rarely empirical evidence supporting their claim.

Case studies, on the other hand, are more data-driven. While they'll still talk about how great your brand is, they support this claim with quantitative data that's relevant to the reader. It's hard to argue with data.

An effective case study must be genuine and credible. Your case study should explain why certain customers are the right fit for your business and how your company can help meet their specific needs. That way, someone in a similar situation can use your case study as a testimonial for why they should choose your business.

Use the case study questions above to create an ideal customer case study questionnaire. By asking your customers the right questions, you can obtain valuable feedback that can be shared with potential leads and convert them into loyal customers.

Editor’s Note: This article was originally published in June 2021 and has been updated for comprehensiveness.

Don't forget to share this post!

Related articles.

ACV: What It Means & How to Calculate It

What Is An Account Development Manager? (And How to Become One)

Strategic Account Managers, Here's How to Amplify Your Efforts

3 Questions that Ensure Key Account Success

Account Management vs. Sales: What's the Difference? [FAQ]

Showcase your company's success using these free case study templates.

Powerful and easy-to-use sales software that drives productivity, enables customer connection, and supports growing sales orgs

• Crimson Careers
• For Employers
• Harvard College
• Harvard Kenneth C. Griffin Graduate School of Arts & Sciences
• Harvard Extension School
• Premed / Pre-Health
• Families & Supporters
• Faculty & Staff
• Prospective Students
• First Generation / Low Income
• International Students
• Students of Color
• Students with Disabilities
• Undocumented Students
• Varsity Athletes
• Explore Interests & Make Career Decisions
• Create a Resume/CV or Cover Letter
• Expand Your Network
• Engage with Employers
• Search for a Job
• Find an Internship
• January Experiences (College)
• Find & Apply for Summer Opportunities Funding
• Prepare for an Interview
• Negotiate an Offer
• Apply to Graduate or Professional School
• Access Resources
• AI for Professional Development and Exploration
• Arts & Entertainment
• Business & Entrepreneurship
• Climate, Sustainability, Environment, Energy
• Government, Int’l Relations, Education, Law, Nonprofits
• Life Sciences & Health
• Technology & Engineering
• Still Exploring
• Talk to an Advisor

How to Succeed in a Case Study Interview

• Share This: Share How to Succeed in a Case Study Interview on Facebook Share How to Succeed in a Case Study Interview on LinkedIn Share How to Succeed in a Case Study Interview on X

Instructor: Jena Viviano

You’ve nailed the first few rounds of interviews, and now you’ve been invited to participate in a case study interview. Curious about what this next stage of the process looks like? In this course, Jena Viviano breaks it down for you, explaining the basic components of a case study interview, how to prepare, and what to do to project confidence and engage your interviewer. Learn how case study interview questions are used and why employers find them beneficial. Discover the key elements that interviewers use to evaluate your answers. Plus, learn how to formulate key questions to dig deeper into the case, develop your own framework for every case study answer, and craft a conclusion with supporting rationale that’s concise and clear. Jena also provides tips for quelling your performance anxiety, as well as sample case study questions that give you a better understanding of what to expect.

Case Interviewing

What is a case interview.

The case interview is a scenario modeled after a real business or management problem. Candidates are asked to analyze a problem and provide a solution based on the information given. The majority of cases don’t have a specific answer that you are expected to give; instead, the interviewer is looking for you to demonstrate a problem-solving process that is both analytical and creative.

Who Uses This Style of Interviewing?

Many consulting firms use the case interview as part of their interview process. The case gives candidates a sense of the type of work that consultants do and allows the employer to test the candidate’s ability to analyze, present information, and perform under pressure. However, any employer who is looking for strong problem-solving and presentation skills can use case interviewing.

Skills Evaluated During a Case Interview

• Communication skills
• Analytical and reasoning skills
• Ability to organize and present information
• Ability to perform under pressure
• Understanding of basic business principles
• Creativity and resourcefulness

Types of case questions:

• Business case (most common).  A scenario to gauge the general business knowledge of candidates and how they can logically apply this knowledge. It could focus on different areas such as profit/loss, organizational structure, and marketing. Example: “An airline finds that, while its revenues are high, the company is still operating at a loss. What is going on?”
• Market-sizing/”Guesstimates.” Estimation questions that require the use of logical deduction and general statistical information to estimate some number or size. Example: “How many gas stations are there in the U.S.?” 
• Brainteasers.  Puzzles or logic questions used to gauge creativity, quantitative skills, and problem-solving skills. Example: “Why are manhole covers round?” 

How to Approach a Case Interview

• Listen to the case . Take notes and rephrase the question to make sure you’ve got all the information.
• Clarify the problem . Ask good questions to clarify and show your understanding of the problem.
• Analyze the problem . Pause and take time to think about how you will approach the problem. Silence is okay!
• Structure an answer . Write out your method for solving the problem. Use examples from in and outside the classroom to show insight.
• Share your answer . Talk through your approach using key points to guide you.
• Summarize your findings . Provide a conclusion that restates your main points.

How to prepare for a case interview

The best preparation for a case interview is to PRACTICE. The more cases you work through, the more comfortable you will become with the process.

Use this general timeline and the resources below to structure your practice:

As early as possible

• Read the case resources Case in Point and the Vault Guide to the Case Interview .
• Coordinate an informational interview with a Georgetown alum working in consulting. Use Hoya Gateway to get connected.
• Sign up for a mock interview to practice your behavioral interview skills (these are important too!).

Two weeks before an interview

• Review and practice cases with a friend.
• Attend an employer case workshop.
• Visit employer websites for each company’s tips and sample cases.

The day before the interview

• Review our tips below.
• Get enough sleep so that your mind will be sharp.
• Bring paper and pens to the interview.

Case Interview Tips

• Take notes.
• Remember, the case is a chance to demonstrate how you think – don’t be discouraged if you don’t know the industry well. Use your analytical and communication skills to show how you would break down the problem.
• Make sure you understand the problem you are being asked to analyze. Paraphrase back to the interviewer to make sure you heard them correctly.
• Ask questions and listen to the answers you get (don’t be discouraged by information that the interviewer doesn’t provide, that likely means it is not important).
• Take time to collect your thoughts (and ask for more time if you need it). Don’t be afraid of silence.
• Lay out a road map for your interviewer (your framework will help here).
• Think out loud to allow the interviewer to see your analytical skills.
• Present your thinking in a clear, logical manner.
• Summarize your recommendations and use examples from your classes, internships, or extra-curricular activities to provide insight beyond the case.
• Read industry magazines and journals (both general and specific).
• Familiarize yourself with some basic statistics, such as the population of the U.S.

There are several resources available both in the career center and online, which can help you prepare for case interviews.

Case Interviewing Guides

• Case In Point: Case Interview Preparation , 10th Edition, (Marc P. Cosentino, 2010)
• Case Interview Secrets  (Victor Cheng, 2012)
• Vault Career Guides  – career guides, employer profiles and rankings, and more. You must create an account with your Georgetown e-mail address to access Vault.
• Vault Guide to the Case Interview , 9th Edition

Sample Cases & Websites

• Management Consulting Case Interviews – hundreds of case interview questions organized by type, industry, and employer. Questions are available for free but solutions require a subscription.
• CaseInterview.com – Sign up for free access to case interview training videos, newsletters, and strategies for success from Victor Cheng, author of Case Interview Secrets .
• MConsulting Prep – Started by a former McKinsey consultant, this website has videos and coaching strategies for interview preparation.
• How to Ace the Case Consulting Interview webinar , Igor Khayet (F’06)
• Case Interview 101 – an introduction video from MConsulting Prep. 

Company Resources for Case Interview Preparation

• Accenture’s case interview workbook (PDF)
• Succeeding in Case Study Interviews : a blog post from an Accenture recruiter

Bain & Company

• Interview preparation tips and interactive case studies

BCG (Boston Consulting Group)

• Interview process and tips

Dean and Company

• Interview preparation
• “How to Crack a Case” presentation  (PDF)
• Interview tips
• Interactive cases

L.E.K. Consulting

• Interview preparation tips with sample cases and videos

McKinsey & Company

• Interview process, including videos, sample cases, and practice tests

Oliver Wyman

• Interview preparation and case interviews
• Interview preparation and process

• All Categories
• Marketing Analytics Software

What Is a Case Study? How to Write, Examples, and Template

In this post

How to write a case study

Case study template, case study examples, types of case studies, what are the benefits of case studies , what are the limitations of case studies , case study vs. testimonial.

In today's marketplace, conveying your product's value through a compelling narrative is crucial to genuinely connecting with your customers.

Your business can use marketing analytics tools to understand what customers want to know about your product. Once you have this information, the next step is to showcase your product and its benefits to your target audience. This strategy involves a mix of data, analysis, and storytelling. Combining these elements allows you to create a narrative that engages your audience. So, how can you do this effectively?

What is a case study? 

A case study is a powerful tool for showcasing a business's success in helping clients achieve their goals. It's a form of storytelling that details real-world scenarios where a business implemented its solutions to deliver positive results for a client.

In this article, we explore the concept of a case study , including its writing process, benefits, various types, challenges, and more.

Understanding how to write a case study is an invaluable skill. You'll need to embrace decision-making – from deciding which customers to feature to designing the best format to make them as engaging as possible.  This can feel overwhelming in a hurry, so let's break it down.

Step 1: Reach out to the target persona

If you've been in business for a while, you have no shortage of happy customers. But w ith limited time and resources, you can't choose everyone.  So, take some time beforehand to flesh out your target buyer personas. 

Once you know precisely who you're targeting, go through your stable of happy customers to find a buyer representative of the audience you're trying to reach. The closer their problems, goals, and industries align, the more your case study will resonate.

What if you have more than one buyer persona? No problem. This is a common situation for companies because buyers comprise an entire committee. You might be marketing to procurement experts, executives, engineers, etc. Try to develop a case study tailored to each key persona. This might be a long-term goal, and that's fine. The better you can personalize the experience for each stakeholder, the easier it is to keep their attention.  

Here are a few considerations to think about before research:

• Products/services of yours the customer uses (and how familiar they are with them)
• The customer's brand recognition in the industry
• Whether the results they've achieved are specific and remarkable
• Whether they've switched from a competitor's product/service
• How closely aligned they are with your target audience

These items are just a jumping-off point as you develop your criteria.  Once you have a list, run each customer through it to determine your top targets. Approach the ones on the top (your "dream" case study subjects) and work your way down as needed.

Who to interview

You should consider interviewing top-level managers or executives because those are high-profile positions. But consider how close they are to your product and its results.

Focusing on an office manager or engineer who uses your product daily would be better. Look for someone with a courtside view of the effects.

The ways to request customer participation in case studies can vary, but certain principles can improve your chances:

• Make it easy for customers to work with you, respecting their valuable time. Be well-prepared and minimize their involvement.
• Emphasize how customers will benefit through increased publicity, revenue opportunities, or recognition for their success. 
• Acknowledge their contributions and showcase their achievements.
• Standardizing the request process with a script incorporating these principles can help your team consistently secure case study approvals and track performance.

Step 2: Prepare for the interview

Case study interviews are like school exams. The more prepared you are for them, the better they turn out. Preparing thoroughly also shows participants that you value their time. You don't waste precious minutes rehashing things you should have already known. You focus on getting the information you need as efficiently as possible.

You can conduct your case study interview in multiple formats, from exchanging emails to in-person interviews. This isn't a trivial decision.  As you'll see in the chart below, each format has its unique advantages and disadvantages. 

You'll also have to consider who will ask and answer the questions during your case study interview. It's wise to consider this while considering the case study format.  The number of participants factors into which format will work best. Pulling off an in-person interview becomes much harder if you're trying to juggle four or five people's busy schedules. Try a video conference instead.

Before interviewing your case study participant, it is crucial to identify the specific questions that need to be asked.  It's essential to thoroughly evaluate your collaboration with the client and understand how your product's contributions impact the company. 

Remember that structuring your case study is akin to crafting a compelling narrative. To achieve this, follow a structured approach:

• Beginning of your story. Delve into the customer's challenge that ultimately led them to do business with you. What were their problems like? What drove them to make a decision finally? Why did they choose you?
• The middle of the case study.  Your audience also wants to know about the experience of working with you. Your customer has taken action to address their problems. What happened once you got on board?
• An ending that makes you the hero.  Describe the specific results your company produced for the customer. How has the customer's business (and life) changed once they implemented your solution?

Sample questions for the case study interview

If you're preparing for a case study interview, here are some sample case study research questions to help you get started:

• What challenges led you to seek a solution?
• When did you realize the need for immediate action? Was there a tipping point?
• How did you decide on the criteria for choosing a B2B solution, and who was involved?
• What set our product or service apart from others you considered?
• How was your experience working with us post-purchase?
• Were there any pleasant surprises or exceeded expectations during our collaboration?
• How smoothly did your team integrate our solution into their workflows?
• How long before you started seeing positive results?
• How have you benefited from our products or services?
• How do you measure the value our product or service provides?

Step 3: Conduct the interview

Preparing for case study interviews can be different from everyday conversations. Here are some tips to keep in mind:

• Create a comfortable atmosphere.  Before diving into the discussion, talk about their business and personal interests. Ensure everyone is at ease, and address any questions or concerns.
• Prioritize key questions.  Lead with your most crucial questions to respect your customer's time. Interview lengths can vary, so starting with the essentials ensures you get the vital information.
• Be flexible.  Case study interviews don't have to be rigid. If your interviewee goes "off script," embrace it. Their spontaneous responses often provide valuable insights.
• Record the interview.  If not conducted via email, ask for permission to record the interview. This lets you focus on the conversation and capture valuable quotes without distractions.

Step 4: Figure out who will create the case study

When creating written case studies for your business, deciding who should handle the writing depends on cost, perspective, and revisions.

Outsourcing might be pricier, but it ensures a professionally crafted outcome. On the other hand, in-house writing has its considerations, including understanding your customers and products. 

Technical expertise and equipment are needed for video case studies, which often leads companies to consider outsourcing due to production and editing costs. 

Tip: When outsourcing work, it's essential to clearly understand pricing details to avoid surprises and unexpected charges during payment.

Step 5: Utilize storytelling

Understanding and applying storytelling elements can make your case studies unforgettable, offering a competitive edge. 

Source: The Framework Bank

Every great study follows a narrative arc (also called a "story arc"). This arc represents how a character faces challenges, struggles against raising stakes, and encounters a formidable obstacle before the tension resolves.

In a case study narrative, consider:

• Exposition. Provide background information about the company, revealing their "old life" before becoming your customer.
• Inciting incident. Highlight the problem that drove the customer to seek a solution, creating a sense of urgency.
• Obstacles (rising action). Describe the customer's journey in researching and evaluating solutions, building tension as they explore options.
• Midpoint. Explain what made the business choose your product or service and what set you apart.
• Climax. Showcase the success achieved with your product.
• Denouement. Describe the customer's transformed business and end with a call-to-action for the reader to take the next step.

Step 6: Design the case study

The adage "Don't judge a book by its cover" is familiar, but people tend to do just that quite often!

A poor layout can deter readers even if you have an outstanding case study. To create an engaging case study, follow these steps:

• Craft a compelling title. Just like you wouldn't read a newspaper article without an eye-catching headline, the same goes for case studies. Start with a title that grabs attention.
• Organize your content. Break down your content into different sections, such as challenges, results, etc. Each section can also include subsections. This case study approach divides the content into manageable portions, preventing readers from feeling overwhelmed by lengthy blocks of text.
• Conciseness is key. Keep your case study as concise as possible. The most compelling case studies are precisely long enough to introduce the customer's challenge, experience with your solution, and outstanding results. Prioritize clarity and omit any sections that may detract from the main storyline.
• Utilize visual elements. To break up text and maintain reader interest, incorporate visual elements like callout boxes, bulleted lists, and sidebars.
• Include charts and images. Summarize results and simplify complex topics by including pictures and charts. Visual aids enhance the overall appeal of your case study.
• Embrace white space. Avoid overwhelming walls of text to prevent reader fatigue. Opt for plenty of white space, use shorter paragraphs, and employ subsections to ensure easy readability and navigation.
• Enhance video case studies. In video case studies, elements like music, fonts, and color grading are pivotal in setting the right tone. Choose music that complements your message and use it strategically throughout your story. Carefully select fonts to convey the desired style, and consider how lighting and color grading can influence the mood. These elements collectively help create the desired tone for your video case study.

Step 7: Edits and revisions

Once you've finished the interview and created your case study, the hardest part is over. Now's the time for editing and revision. This might feel frustrating for impatient B2B marketers, but it can turn good stories into great ones.

Ideally, you'll want to submit your case study through two different rounds of editing and revisions:

• Internal review. Seek feedback from various team members to ensure your case study is captivating and error-free. Gather perspectives from marketing, sales, and those in close contact with customers for well-rounded insights. Use patterns from this feedback to guide revisions and apply lessons to future case studies.
• Customer feedback. Share the case study with customers to make them feel valued and ensure accuracy. Let them review quotes and data points, as they are the "heroes" of the story, and their logos will be prominently featured. This step maintains positive customer relationships.

Case study mistakes to avoid

• Ensure easy access to case studies on your website.
• Spotlight the customer, not just your business.
• Tailor each case study to a specific audience.
• Avoid excessive industry jargon in your content.

Step 8: Publishing

Take a moment to proofread your case study one more time carefully. Even if you're reasonably confident you've caught all the errors, it's always a good idea to check. Your case study will be a valuable marketing tool for years, so it's worth the investment to ensure it's flawless. Once done, your case study is all set to go!

Consider sharing a copy of the completed case study with your customer as a thoughtful gesture. They'll likely appreciate it; some may want to keep it for their records. After all, your case study wouldn't have been possible without their help, and they deserve to see the final product.

Where you publish your case study depends on its role in your overall marketing strategy. If you want to reach as many people as possible with your case study, consider publishing it on your website and social media platforms. 

Tip: Some companies prefer to keep their case studies exclusive, making them available only to those who request them. This approach is often taken to control access to valuable information and to engage more deeply with potential customers who express specific interests. It can create a sense of exclusivity and encourage interested parties to engage directly with the company.

Step 9: Case study distribution

When sharing individual case studies, concentrate on reaching the audience with the most influence on purchasing decisions

Here are some common distribution channels to consider:

• Sales teams. Share case studies to enhance customer interactions, retention , and upselling among your sales and customer success teams. Keep them updated on new studies and offer easily accessible formats like PDFs or landing page links.
• Company website. Feature case studies on your website to establish authority and provide valuable information to potential buyers. Organize them by categories such as location, size, industry, challenges, and products or services used for effective presentation.
• Events. Use live events like conferences and webinars to distribute printed case study copies, showcase video case studies at trade show booths, and conclude webinars with links to your case study library. This creative approach blends personal interactions with compelling content.
• Industry journalists. Engage relevant industry journalists to gain media coverage by identifying suitable publications and journalists covering related topics. Building relationships is vital, and platforms like HARO (Help A Reporter Out) can facilitate connections, especially if your competitors have received coverage before.

Want to learn more about Marketing Analytics Software? Explore Marketing Analytics products.

It can seem daunting to transform the information you've gathered into a cohesive narrative.  We’ve created a versatile case study template that can serve as a solid starting point for your case study.

With this template, your business can explore any solutions offered to satisfied customers, covering their background, the factors that led them to choose your services, and their outcomes.

The template boasts a straightforward design, featuring distinct sections that guide you in effectively narrating your and your customer's story. However, remember that limitless ways to showcase your business's accomplishments exist.

To assist you in this process, here's a breakdown of the recommended sections to include in a case study:

• Title.  Keep it concise. Create a brief yet engaging project title summarizing your work with your subject. Consider your title like a newspaper headline; do it well, and readers will want to learn more. 
• Subtitle . Use this section to elaborate on the achievement briefly. Make it creative and catchy to engage your audience.
• Executive summary.  Use this as an overview of the story, followed by 2-3 bullet points highlighting key success metrics.
• Challenges and objectives. This section describes the customer's challenges before adopting your product or service, along with the goals or objectives they sought to achieve.
• How product/service helped.  A paragraph explaining how your product or service addressed their problem.
• Testimonials.  Incorporate short quotes or statements from the individuals involved in the case study, sharing their perspectives and experiences.
• Supporting visuals.  Include one or two impactful visuals, such as graphs, infographics, or highlighted metrics, that reinforce the narrative.
• Call to action (CTA).  If you do your job well, your audience will read (or watch) your case studies from beginning to end. They are interested in everything you've said. Now, what's the next step they should take to continue their relationship with you? Give people a simple action they can complete. 

Case studies are proven marketing strategies in a wide variety of B2B industries. Here are just a few examples of a case study:

• Amazon Web Services, Inc.  provides companies with cloud computing platforms and APIs on a metered, pay-as-you-go basis. This case study example illustrates the benefits Thomson Reuters experienced using AWS.
• LinkedIn Marketing Solutions combines captivating visuals with measurable results in the case study created for BlackRock. This case study illustrates how LinkedIn has contributed to the growth of BlackRock's brand awareness over the years. 
• Salesforce , a sales and marketing automation SaaS solutions provider, seamlessly integrates written and visual elements to convey its success stories with Pepe Jeans. This case study effectively demonstrates how Pepe Jeans is captivating online shoppers with immersive and context-driven e-commerce experiences through Salesforce.
• HubSpot offers a combination of sales and marketing tools. Their case study demonstrates the effectiveness of its all-in-one solutions. These typically focus on a particular client's journey and how HubSpot helped them achieve significant results.

There are two different types of case studies that businesses might utilize:

Written case studies 

Written case studies offer readers a clear visual representation of data, which helps them quickly identify and focus on the information that matters most. 

Printed versions of case studies find their place at events like trade shows, where they serve as valuable sales collateral to engage prospective clients.  Even in the digital age, many businesses provide case studies in PDF format or as web-based landing pages, improving accessibility for their audience. 

Note: Landing pages , in particular, offer the flexibility to incorporate rich multimedia content, including images, charts, and videos. This flexibility in design makes landing pages an attractive choice for presenting detailed content to the audience.

Written case study advantages

Here are several significant advantages to leveraging case studies for your company:

• Hyperlink accessibility.  Whether in PDF or landing page format, written case studies allow for embedded hyperlinks, offering prospects easy access to additional information and contact forms.
• Flexible engagement.  Unlike video case studies, which may demand in-person arrangements, written case studies can be conducted via phone or video streaming, reducing customer commitment and simplifying scheduling.
• Efficient scanning . Well-structured written case studies with a scannable format cater to time-strapped professionals. Charts and callout boxes with key statistics enhance the ease of information retrieval.
• Printable for offline use.  Written case studies can be effortlessly printed and distributed at trade shows, sales meetings, and live events. This tangible format accommodates those who prefer physical materials and provides versatility in outreach, unlike video content, which is less portable.

Written case study disadvantages

Here are some drawbacks associated with the use of case studies:

• Reduced emotional impact.  Written content lacks the emotional punch of live video testimonials, which engage more senses and emotions, making a stronger connection.
• Consider time investment.  Creating a compelling case study involves editing, proofreading, and design collaboration, with multiple revisions commonly required before publication.
• Challenges in maintaining attention.  Attention spans are short in today's ad-saturated world. Using graphics, infographics, and videos more often is more powerful to incite the right emotions in customers.

Video case studies

Video case studies are the latest marketing trend. Unlike in the past, when video production was costly, today's tools make it more accessible for users to create and edit their videos. However, specific technical requirements still apply.

Like written case studies, video case studies delve into a specific customer's challenges and how your business provides solutions. Yet, the video offers a more profound connection by showcasing the person who faced and conquered the problem.

Video case studies can boost brand exposure when shared on platforms like YouTube. For example, Slack's engaging case study video with Sandwich Video illustrates how Slack transformed its workflow and adds humor, which can be challenging in written case studies focused on factual evidence.

Source : YouTube

This video case study has garnered nearly a million views on YouTube.

Video case study advantages

Here are some of the top advantages of video case studies. While video testimonials take more time, the payoff can be worth it. 

• Humanization and authenticity.  Video case studies connect viewers with real people, adding authenticity and fostering a stronger emotional connection.
• Engaging multiple senses.  They engage both auditory and visual senses, enhancing credibility and emotional impact. Charts, statistics, and images can also be incorporated.
• Broad distribution.  Videos can be shared on websites, YouTube, social media, and more, reaching diverse audiences and boosting engagement, especially on social platforms.

Video case study disadvantages

Before fully committing to video testimonials, consider the following:

• Technical expertise and equipment.  Video production requires technical know-how and equipment, which can be costly. Skilled video editing is essential to maintain a professional image. While technology advances, producing amateurish videos may harm your brand's perception.
• Viewer convenience.  Some prospects prefer written formats due to faster reading and ease of navigation. Video typically requires sound, which can be inconvenient for viewers in specific settings. Many people may not have headphones readily available to watch your content.
• Demand on case study participants.  On-camera interviews can be time-consuming and location-dependent, making scheduling challenging for case study participants. Additionally, being on screen for a global audience may create insecurities and performance pressure.
• Comfort on camera.  Not everyone feels at ease on camera. Nervousness or a different on-screen persona can impact the effectiveness of the testimonial, and discovering this late in the process can be problematic.

Written or video case studies: Which is right for you?

Now that you know the pros and cons of each, how do you choose which is right for you?

One of the most significant factors in doing video case studies can be the technical expertise and equipment required for a high level of production quality. Whether you have the budget to do this in-house or hire a production company can be one of the major deciding factors.

Still, written or video doesn't have to be an either-or decision. Some B2B companies are using both formats. They can complement each other nicely, minimizing the downsides mentioned above and reaching your potential customers where they prefer.

Let's say you're selling IT network security. What you offer is invaluable but complicated. You could create a short (three- or four-minute) video case study to get attention and touch on the significant benefits of your services. This whets the viewer's appetite for more information, which they could find in a written case study that supplements the video.

Should you decide to test the water in video case studies, test their effectiveness among your target audience. See how well they work for your company and sales team. And, just like a written case study, you can always find ways to improve your process as you continue exploring video case studies.

Case studies offer several distinctive advantages, making them an ideal tool for businesses to market their products to customers. However, their benefits extend beyond these qualities. 

Here's an overview of all the advantages of case studies:

Valuable sales support

Case studies serve as a valuable resource for your sales endeavors. Buyers frequently require additional information before finalizing a purchase decision. These studies provide concrete evidence of your product or service's effectiveness, assisting your sales representatives in closing deals more efficiently, especially with customers with lingering uncertainties.

Validating your value

Case studies serve as evidence of your product or service's worth or value proposition , playing a role in building trust with potential customers. By showcasing successful partnerships, you make it easier for prospects to place trust in your offerings. This effect is particularly notable when the featured customer holds a reputable status.

Unique and engaging content

By working closely with your customer success teams, you can uncover various customer stories that resonate with different prospects. Case studies allow marketers to shape product features and benefits into compelling narratives. 

Each case study's distinctiveness, mirroring the uniqueness of every customer's journey, makes them a valuable source of relatable and engaging content. Storytelling possesses the unique ability to connect with audiences on an emotional level, a dimension that statistics alone often cannot achieve. 

Spotlighting valuable customers

Case studies provide a valuable platform for showcasing your esteemed customers. Featuring them in these studies offers a chance to give them visibility and express your gratitude for the partnership, which can enhance customer loyalty . Depending on the company you are writing about, it can also demonstrate the caliber of your business.

Now is the time to get SaaS-y news and entertainment with our 5-minute newsletter,   G2 Tea , featuring inspiring leaders, hot takes, and bold predictions. Subscribe below!

It's important to consider limitations when designing and interpreting the results of case studies. Here's an overview of the limitations of case studies:

Challenges in replication

Case studies often focus on specific individuals, organizations, or situations, making generalizing their findings to broader populations or contexts challenging. 

Time-intensive process

Case studies require a significant time investment. The extensive data collection process and the need for comprehensive analysis can be demanding, especially for researchers who are new to this method.

Potential for errors

Case studies can be influenced by memory and judgment, potentially leading to inaccuracies. Depending on human memory to reconstruct a case's history may result in variations and potential inconsistencies in how individuals recall past events. Additionally, bias may emerge, as individuals tend to prioritize what they consider most significant, which could limit their consideration of alternative perspectives.

Challenges in verification

Confirming results through additional research can present difficulties. This complexity arises from the need for detailed and extensive data in the initial creation of a case study. Consequently, this process requires significant effort and a substantial amount of time.

While looking at case studies, you may have noticed a quote. This type of quote is considered a testimonial, a key element of case studies.

If a customer's quote proves that your brand does what it says it will or performs as expected, you may wonder: 'Aren't customer testimonials and case studies the same thing?' Not exactly.

Testimonials are brief endorsements designed to establish trust on a broad scale. In contrast, case studies are detailed narratives that offer a comprehensive understanding of how a product or service addresses a specific problem, targeting a more focused audience. 

Crafting case studies requires more resources and a structured approach than testimonials. Your selection between the two depends on your marketing objectives and the complexity of your product or service.

Case in point!

Case studies are among a company's most effective tools. You're  well on your way to mastering them.

Today's buyers are tackling much of the case study research methodology independently. Many are understandably skeptical before making a buying decision. By connecting them with multiple case studies, you can prove you've gotten the results you say you can. There's hardly a better way to boost your credibility and persuade them to consider your solution.

Case study formats and distribution methods might change as technology evolves. However, the fundamentals that make them effective—knowing how to choose subjects, conduct interviews, and structure everything to get attention—will serve you for as long as you're in business. 

We covered a ton of concepts and resources, so go ahead and bookmark this page. You can refer to it whenever you have questions or need a refresher.

Dive into market research to uncover customer preferences and spending habits.

Kristen McCabe

Kristen’s is a former senior content marketing specialist at G2. Her global marketing experience extends from Australia to Chicago, with expertise in B2B and B2C industries. Specializing in content, conversions, and events, Kristen spends her time outside of work time acting, learning nature photography, and joining in the #instadog fun with her Pug/Jack Russell, Bella. (she/her/hers)

Explore More G2 Articles

• Awards and Recognition
• Board of Directors
• Client Stories
• Corporate Social Responsibility
• WNS Women Returnship
• Protecting Our Planet
• Enabling People to Outperform
• Caring for Our Communities
• Ethics, Integrity and Compliance
• Delivering Value to Our Clients
• From the CEO
• South Africa
• United States
• The Philippines
• United Arab Emirates
• United Kingdom
• Management Team
• Press Releases
• WNS in the News
• Vision and Mission
• Generative AI
• ESG Analytics
• Augmented Data Management and Data Governance
• BI & Visualization
• Big Data Engineering
• Data Governance Intelligent Cloud
• Data Sciences
• Embedded Analytics
• Fraud And Risk Analytics
• HR Data Analytics
• Customer Loyalty Analytics
• Marketing Analytics Services
• Insurance Analytics
• Retail Media
• Centers of Excellence
• Customer Experience Consulting
• HIFFI – Home Insurance in a Jiffy
• Digitally Simulated Training Environment
• WNS Open Talent
• Decision Support
• Financial Planning and Analysis (FP&A)
• AIntegrated OneFinance Solution
• CFO Advisory Services
• WNS Duplicate Invoice Detector
• WNS Forecaster and Predictor
• WNS Journal Entry Analytics
• WNS Risk and Audit Analytics
• WNS Working Capital Analytics
• Outperforming CFO Framework (OCF)
• Procure-to-Pay (P2P)
• Quote-to-Sustain (QtS)
• WNS TRAC eClose
• Anti-Money Laundering and Know Your Customer
• Financial Crime
• Fraud and Risk Analytics
• Fraud Management Services
• Regulatory Compliance and Risk Reporting
• Third-Party Risk Management
• Compensation
• HR Analytics
• Learning and Performance Management
• Payroll Administration
• Recruitment Services
• Workforce Management
• Legal Services
• Category Management
• Contracting Services
• Digital Solutions
• Procure-To-Pay Services
• Sourcing Services
• Supplier Management
• Supply Chain Management
• Robotics & Digital Automation TRAC
• Supplier Portal
• Technology Services
• WNS IP Labs
• Insurance TRAC
• RPA & Intelligent Automation TRAC
• Security TRAC
• Travel TRAC
• Analytics Incubation Center
• Big Data Analytics
• Data Sciences Group
• Process Maturity Model
• Value Innovation Program
• WNS Transition
• Workforce And Productivity Management
• Industry Segments
• Capital Markets Operations
• Research and Analysis Services
• Trade Finance
• Financial Crime and Compliance (FCC)
• FinTech Services
• Mortgage Operations
• Retail Banking
• Banking Analytics
• Banking and Financial Services Consulting
• Credit Risk Management and Underwriting Services
• Customer Experience in BFS
• Finance & Accounting for Banks & Financial Institutions
• Governance, Risk and Compliance
• Model Risk Management
• Customer Acquisition and Customer Experience Management Services
• Driving Insight-led Decisions
• Realizing Your Energy and Utility Digital Transformation Goals
• Carbon Accounting
• Digital Customer Experience Services
• Digital Meter-to-Cash
• Smart Collection and Debt Management Services
• Elevating Business Operations with Shared Services
• Customer Management Services
• Energy & Utilities Analytics
• Shared Services
• Customer Analytics
• Data Management
• Revenue Assurance
• Risk Analytics
• Video and Voice AI Solution
• Benefits Administration
• Care Management
• Clinical Operations
• Healthcare Claims
• Medical Bill Review
• Member Engagement Services
• Provider Lifecycle Management
• Revenue Cycle Management
• Content and Information Publishers
• Executive Search Services
• Consumer Tech and Platforms
• Internet and Social Media
• ID and Background Verification Firms
• Legal Service Firms
• Real Estate Services
• Risk and Compliance Service Providers
• Design Services
• Hi-Tech & Professional Services Analytics
• InfoTurf.ai
• Product Data Operations
• Revenue Operations
• Pension Risk Transfer
• Lloyd’s of London Market
• Claims Prevention
• Straight-through Processing (STP)
• Subrogation Services
• Insurance Finance & Accounting
• WNS Claims 360
• Voice AI Solution
• Finance and Accounting

Procurement

• Research and Analytics
• Biostatistics
• Clinical Data Management
• Medical Affairs
• Pharmacovigilance
• Competitive Intelligence
• Forecasting
• Business Intelligence
• Marketing & Pricing Analytics
• Sales Analytics
• Commercial Assessment
• Customer Experience
• Finance & Accounting
• Supply Chain Management (SCM)
• CPG & Retail Analytics
• Integrated Sales Order Management
• Forwarders and Brokers
• Safety and Compliance
• WNS Air Cargo Optimized Solutions Suite (ACOSS)
• WNS Document Verification Solution
• WNS Volume Surge Solution
• Hospitality Companies
• Online Travel Agencies
• Travel Management Companies
• Travel and Leisure Analytics
• WNS Ancillary Revenue Optimizer Suite
• WNS Post-booking Servicing Solution
• Verifare Plus
• WNS and HFS Research Travel and Hospitality Market Impact Report
• Private Equity
• WNS DESAiGN HUB

Perspectives

Re-engineering F&A, Procurement and HR Operations for Scalability

25 september 2024.

A WNS Perspective

• A leading manufacturer sought to streamline and centralize its F&A , HR and procurement processes, replacing scattered and manual practices with automated, standardized systems.
• Leveraging its domain expertise, process excellence methodologies, transformation frameworks and automation capabilities, WNS transformed the client's workflows, enhancing efficiency and accuracy across key functions like invoice processing, payroll and procurement.
• The collaboration resulted in scalable, cohesive operations with improved turnaround times, better compliance and a more efficient overall system, setting the stage for future growth and adaptability.

A Four-year Transformative Odyssey of Achievement through Co-creation

This case study encapsulates the collaborative journey of WNS and a US-based hydro-equipment manufacturer as we turned scattered and disparate Finance and Accounting (F&A), Human Resources (HR) and procurement practices into a centralized and significantly more automated system. The objective was to expedite invoice resolutions, improve customer experience and scale operations.

In the era of flourishing green technologies…

Businesses are thriving in a wave of innovation. Local authorities and industries are implementing pioneering solutions to achieve their net-zero, de-carbonization and circularity goals, fueling the demand for sustainable business. However, fragmented supply chains and ad-hoc / manual processes impede operational efficiency and productivity.

For a leading hydro-equipment maker…

The challenge was managing its F&A, HR and procurement operations scattered across multiple locations, operating companies and lines of business. These functions wrestled with ad-hoc and manual processes, information silos and a workforce only partially equipped with the requisite knowledge.

The repercussions of this disjointed approach were evident in the client’s Enterprise Resource Planning (ERP) platform, which held invoices in limbo due to information gaps. Over a six-month period, the cumulative value of these stalled invoices amassed to a staggering USD 18 Million.

Dispersed, disconnected processes, along with diverse systems and policies, and a lack of critical-to-quality parameters spawned non-standardized practices and operational inefficiencies. Consequently, documentation, accountability and visibility into crucial business facets suffered.

Key challenges across the three functions encompassed:

Accounts Payable (AP)

Absence of formal procedures to address blocked supplier invoices resulted in >75 percent of the invoices being over a year old.

Record-to-Report (R2R)

Ad-hoc practices at different locations impacted reconciliations, the accuracy of reports and timelines.

Manual handling of new employee records led to payroll delays.

Workflow was hampered by disparate activities, multiple hand-offs and high Turnaround Times (TAT).

Raising Orders

The manual and fragmented nature of sales and purchase order processing resulted in error-prone documentation.

Employee Skilling

Manual training and assessment methodologies led to heightened reliance on subject matter experts.

Team Structure

Distributed ownership and a lack of clear sub-processes translated into protracted TAT and errors across all stages.

The client sought to consolidate and standardize its systems – streamlining the F&A, HR and procurement workflows – and establish a scalable, adaptive model for a dynamic business milieu.

Stepping in as a co-creation partner, WNS leveraged…

Its in-house transformation frameworks and partner ecosystem of intelligent technologies to re-invent the client’s F&A and HR functions. Concurrently, WNS Procurement – the high-impact, digital procurement ecosystem and supply chain capability at WNS – collaborated with the client to transform the procurement landscape. Our performance model harmonized service-level agreements and key performance indicators with the client’s commercial and financial goals.

A team of ~60 Full-time Equivalents (FTE) consolidated and centralized F&A, HR and procurement services spanning diverse platforms using a cost-effective shared services model. This was bolstered by robotic process automation woven into various work streams to unlock productivity and efficiency. A case management tool was deployed to integrate invoice processing and helpdesk activities to ensure a seamless supplier experience. Finally, WNS developed and deployed comprehensive business process documentation, with a periodic review mechanism.

Highlights of our solution included:

F&A and HR Solutions

Establishing centralized services from India and the Philippines

Sensitizing vendors to the correct use of the AP helpdesk for reduced volumes in invoice processing

Automating the Statement of Accounts (SOA) in Credit & Collection for proactive delivery to suppliers

Initiating an ongoing correspondence to steer customers to adopt the Corporate Trade Exchange (CTX) payment process

Creating detailed month-close trackers

Centralizing the rewards and recognitions program with a clear approvals mechanism

Crafting a centralized hub to manage tickets, owners and status queries, coupled with the implementation of a single-parent payroll ticket for every pay cycle

Establishing a quality team for daily / live audits and periodic governance

Re-defining the “as-is” process while driving process maturity based on HR best practices

Procurement Solutions

Streamlining and standardizing all process flows and touchpoints between AP and procurement for efficiency and faster invoice resolutions

Automating sales order creation using the SAP system and Electronic Data Interchange (EDI)

Digitizing new-hire training and evaluation for maximized output

Employing value-stream mapping to re-organize teams for clear accountability, reduced escalations and improved customer satisfaction

Leveraging SAP to automate Framework Orders (FO) in bulk, reducing human error and improving TAT

Prioritizing customer satisfaction scores using the Voice of Customer (VoC) methodology, facilitated by regular interactions with key stakeholders and informed by feedback / action plans

The large-scale transformation unveiled...

Cohesive, centralized F&A, HR and procurement practices, fortified by automation and trained FTEs, driving customer, supplier and employee-friendly policies. Key benefits included:

Augmented Scalability

• >USD 130 Million in total transactions handled by the collections team
• >8,400 transactions handled across all activities in HR shared services
• >70,000 transactions handled annually in payroll

Amplified Decision Support

• Real-time monitoring and efficient resource allocation to resolve blocked invoices
• Greater visibility for clients: Status, aging and open liability at the entity, profit center and location levels

Elevated Experience

• 10/10 VoC scores consistently received
• ~10 percent reduction in escalations
• ~5 percent faster TAT across sub-processes
• >90 percent reduction in payroll TAT for processing rewards and recognition
• Enhanced supplier experience due to improved on-time payment

Enhanced Process Outcomes

• 34 percent reduction in overdue invoices
• 20 percent increase in auto cash application through process improvement
• Outstanding invoice value halved down to USD 9 Million
• The aging period of invoices reduced from a year to <90 days
• >40 percent reduction in the daily average of outstanding blocked invoices
• ~80 percent reduction in TAT from FO automation
• Reduction in payroll cycle time
• Optimization in span control
• 100 percent achievement in accurate and timely service delivery
• Integrated HR helpdesk established for Tier 1 and 2 queries

Join the conversation

Related To:

Similar perspectives.

Shipping & Logistics

3 Ways Digital Asset Management is Transforming Shipping &…

24 May 2024

Manufacturing

Generating Differential Customer Value with AI-Driven Analytics

26 May 2022

Assessing the Impact of COVID-19 on Manufacturing and the Path…

09 February 2022